Film Dry out Time:

 

The solution used for the installation of the solar Gard Window Film will require a dry out time. Cold and rainy weather will effect the length of the dry out time. 

A cloudy look may occur during the dry out period. Give the film time to dry out for the best results. Do not clean film for 30 atleast days after installation.  

 

  

                                                  Cleaning Instructions:

 

                                 Always use fresh clean soft materials to wash and dry your window film surfaces.

 

                                 Most glass cleaners will work well, although a good cleaning solution for window film is 1/2 ounce

                                 of liquid dish soap added to 1 quart of fresh water.

                                 A soft cloth or a clean synthetic sponge is recommended for washing the window film followed

                                 by another clean soft cloth or soft rubber squeegee for drying.

 

                                 To avoid scratching the film, do not use bristle brushes, abrasive scrubbing sponges, or any cleaning

                                 materials that may have been contaminated with dirt particles, as is

                                 commonly the case when washing interior and exterior windows with the same cleaning materials.

                                                                                                                                                                                                                 

                                  Some brands of paper towels are coarse enough to put fine scratches in the film, even films with 

                                  scratch resistant, protective hard coat finish. While these scratches may

                                  be too thin to be seen at the beginning, they can damage the polished look of the film over time.

 

 
To Top