In stock
SKU
AP4CH21

PAC AP4-CH21

Amplifier Replacement Interface: Allows seamless replacement of the premium factory amp in select 2007-2016 Chrysler-made vehicles
$299.00
Did you find this item priced lower somewhere else? YES

PAC AmpPRO AP4-CH21 Amplifier Replacement Interface

Allows seamless replacement of the premium factory amp in select 2007-2016 Chrysler-made vehicles

  • amplifier replacement module and T-harness
  • works with select 2007-16 Chrysler, Dodge, and Jeep vehicles with a premium sound system
  • 6-channel RCA outputs (front, rear, subs)
  • switchable 5- or 4-volt output
  • retains factory radio controls and audio features
  • wired remote level control for sub channels
  • remote turn-on lead for amplifiers
  • AmpPRO PC App, available from PAC, lets you adjust minimum volume and 3-band EQ via your Windows-run PC
  • optional TOSLINK adapter provides digital output

Features

Amplifier Integration Interface: The PAC AmpPRO AP4-CH21 simplifies the installation of aftermarket amplifiers in select Chrysler, Dodge, and Jeep vehicles with data-bus controlled factory sound systems. With the AmpPRO AP4-CH21, you can improve your vehicle's audio performance while keeping an original radio's fit, finish, and features.

Notes:

  • The factory radio and factory amplifier must remain connected in the vehicle and be operational in order to use the PAC AmpPRO interface.
  • If you are only using the PAC AmpPRO interface to add a subwoofer amplifier, the factory amplifier will still power the other speakers in the vehicle.

Vehicle Compatibility: The PAC AmpPRO AP4-CH21 amplifier integration interface is compatible with the following 2007-2016 Chrysler, Dodge, and Jeep vehicles with a data-bus controlled factory premium sound system.

Make Model Year
Chrysler Town & Country 2008-2016
Dodge Challenger 2008-2014
Durango 2009-2013
Grand Caravan 2008-2016
Ram 2009-2012
Jeep Grand Cherokee 2010-2013
Wrangler 2007-2016
Note: This interface is only compatible in vehicles equipped with a data-bus controlled premium sound system. To verify compatibility - look for an Alpine, Beats, or Harmon Kardon badge on the door speakers, center speaker, or factory subwoofer. If none of these brands are shown, check for the presence of a center speaker or subwoofer.

6Ch Pre-Outs: The PAC AmpPRO AP4-CH21 provides a 6-channel pre-amp output for use with aftermarket amplifiers. Using the full-range, fixed level factory radio output, in conjunction with data-bus CAN messages, the AP4-CH21 delivers a variable 5V RMS pre-amp output with fading, balance, equalization, and level control capabilities.

Non-Fading Level Control Knob: Channels 5-6 (Sub) of the AP4-CH21 are non-fading outputs. The output level of channels 5-6 can be controlled using the supplied level control knob. The level control knob comes with a 6' cable which plugs into the interface module and should be mounted in an accessible location.

Data Controlled Remote Turn-On: A data controlled remote amplifier turn on wire is also provided by the PAC AmpPRO AP4-CH21. The remote turn-on is rated at 2A of current. If more current is needed an external relay must be used.

Retained Factory Audio Features: The PAC AmpPRO AP4-CH21 also retains all audio from other vehicle features such as factory Navigation Prompts, Bluetooth, uConnect, and Warning Chimes.

Minimum Volume: If the minimum volume of your factory radio is too loud once the AP4-CH21 is installed, you can manually set the level of the minimum volume using either the programming button on the side of the interface or the factory SWC (Steering Wheel Controls) in conjunction with the supplied level control knob. You can also use AmpPRO PC app. 

AmpPRO PC App: Using the AmpPRO PC App (for Windows PC only) allows you to configure user interface options such as Minimum Volume Level and a 3-Band EQ from your Windows computer or laptop. The app can also be used to update product firmware.

  • Minimum Volume Level: From the app you can set the minimum volume level of the factory radio.
  • 3-Band EQ: Enables the 3-band EQ (Bass-Mid-Treble) with frequency and Q-factory adjustment. The Bass Frequency can be set to 60, 80, 100, or 120Hz; while the Bass Q-Factor can be set to 0.5, 1.0, 1.5, or 2.0. The Mid Frequency can be set to 500, 1k, 1.5k, or 2.5k; while the Mid Q-Factor can be set to 0.75, 1.0, 1.25, or 1.5. The Treble Frequency can be set to 7.5k, 10k, 12.5k, or 15k; while the Treble Q-Factory can be set to 0.75 or 1.25.
  • Firmware: The AmpPRO app will also allow you to update the interface with new firmware as it becomes available.
Note: These AmpPRO PC App settings can be adjusted with the module installed in the vehicle or on the bench. However, it is recommended to make the adjustments with the module installed, and the factory radio on so that the changes can be heard.

Dip Switch: Set dip switch 2 to "ON" to lower the RCA output voltage to 4V. Set the dip switch 2 "OFF" to keep the RCA output voltage at 5V. Dip switches 1-3-4 are not used.

Optional Toslink Add-On Module: When used in conjunction with PAC's APA-TOS1 (APATOS1; sold separately), the AP4-CH21 can provide a variable 2-channel fiber optic digital audio output (toslink). Toslink fiber-optical cable also sold separately.

More Information
Price
$299.00
Condition
New
Manufacturer
PAC
Warranty
1 Year
Write Your Own Review
You're reviewing:PAC AP4-CH21
Your Rating
To Top