AP5.9 bit

AP5.9 bit amplifier is ideal to realize a two way front full active plus subwoofer system using the fifth mono channel with 270 W @ 2 ohms. The built-in processor with 9 output channels, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP4 D amplifier, creating a very powerful system in a small space thanks to the optional stacking system.

POWER SUPPLY

• Voltage: 7.5, 15 VDC
• Idling current: 1.5 A
• Switched off: 0.04 mA
• Consumption @ 14.4 VDC 2 ohms Max Musical Power (without CPL): 30 A
• Remote IN 7 - 15 VDC (1 mA)
• Remote OUT 11 - 15 VDC (200 mA)
• Fuse 30 A
• ART (Automatic Remote Turn on/off) Speakers to input - selectable
• AST (Automatic Signal Turn on/off) Pre-In to input - selectable
• CPL (Continuous Power Limiting) Max continuous power - selectable

AMPLIFIER STAGE

• Distortion - THD @ 1kHz 4 ohms , 90% Output Power (Ch 1-2-3-4): 0.08 %
• Distortion - THD @ 1kHz 4 ohms , 90% Output Power (Ch 5): 0.1 %
• Bandwidth (-3 dB, 2 V RMS, 4 ohms ): 10 / 20k Hz / 10 / 500Hz SUB
• S/N ratio @ A weighted, 1V, Output Power: 95 dB A
• Damping factor @ 1 kHz, 2 V RMS, 4 ohms : over 70
• Input sensitivity: 2 / 15 V RMS
• Input impedance: 15 k ohms

LOAD IMPEDANCE (MIN):

• Ch 1-2-3-4-5: 2 ohms

MAX POWER: 530 W

OUTPUT POWER (RMS) @ 14.4 VDC, 1% THD:

• 5 Ch @ 4 ohms : 20 W x 2 + 50 W x 2 + 150 W x 1
• 5 Ch @ 2 ohms : 40 W x 2 + 90 W x 2 + 270 W x 1

OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:

• 5 Ch @ 4 ohms : 25 W x 2 + 60 W x 2 + 190 W x 1
• 5 Ch @ 2 ohms : 50 W x 2 + 115 W x 2 + 350 W x 1

CEA Specifications:

• Output power @ 4 ohms , less than 1% THD+N, 14.4 V 20 W x 2 + 50 W x 2 + 150 W x 1
• SN ratio (ref. 1 W output) 80 dB A

SIGNAL CONNECTIONS

Input Stage:

• Config 1 Hi / Lo level FL-FR-RL-RR + N.2 customizable
• Config 2 Hi / Lo level FL-FR-RL-RR + Stereo Aux In (Selectable: DRC/select.)
• Optical IN (max 96 kHz/24 bit) S/P-DIF PCM 96 kHz/24 bit max (Selectable: DRC/select.)

DIGITAL SIGNAL PROCESSOR (32 bit Cirrus Logic; Clock speed: 147 MHz)

• Crossover: Full / Hi-Pass / Lo-Pass / Band Pass
• Crossover type and slope: Linkwitz @ 12/24 dB - Butterworth @ 6/12/18/24 dB
• Crossover Frequency: 68 steps @ 20 / 20k Hz
• Phase inversion: 0 degrees / 180 degrees
• Analog Input Equalizer: Automatic De-Equalization
• Output Equalizer N.9 Parametrics Equalizers: +/- 12 dB;10 pole; 20 / 20k Hz
• Time Alignment Distance 0 / 510 cm / 0 / 200.8 in.
• Time Alignment Delay 0 / 15 ms
• Time Alignment Step 0.08 ms; 2.8 cm / 1.1 in.
• Time Alignment Fine Set 0.02 ms; 0.7 cm / 0.27 in.

SYSTEM SET:

• Preset (Drive Preset) Rotary switch for 7 installation Presets
• Acoustic Preset N.2 DSP Memory, DRC selectable

CONTROL CONNECTIONS

• From / to personal computer 1 x micro USB-B
• To Audison Electronics DRC controls
• ASP Automatic Speaker Presence
• Optical / AUX select 12V control for Optical In / AUX enable
• Master enable 12V control for Master In enable