THE AMP THAT DOES IT ALL

Power your customers entire system with this 5-channel system amplifier that combines a 4-channel full-range and monoblock subwoofer amplifier in one single, easy-to-install package. A generous feature set adds even more value.

Part Number: 010-03883-00 AKA JD700/5

Key Features

• 12-decibel/octave filter with selectable high, low or defeat (off) modes
• Selectable input voltage: low (200 mv to 2-volt rms) to high (800 mv to 8-volt rms)
• 3 turn-on options: +12-volt remote wire, signal sensing or DC offset
• Onboard LED clipping indicator simplifies level setting
• Signal routing flexibility with 2-, 4- or 6-channel input mode

Features

• EFFICIENT CLASS-D DESIGN Small size, minimal heat and lots of power — Class-D amplifier design offers significant advantages. And JL Audio's NexD switching technology adds even more, using enhanced pulse width modulation techniques to boost the amplifier’s bandwidth while minimizing distortion and improving efficiency.
• TOTAL SYSTEM POWER The 4-channel amplifier churns out 400 watts of total power — 100 watts from each of its 4 channels, perfect for door speakers. A 300-watt mono channel offers plenty of power for a 10- or 12-inch subwoofer.
• PREMIUM-LEVEL SIGNAL PROCESSING This JD series amplifier’s signal processing features include high- or low-pass 12 decibel/octave filters for each channel pair, with continuously variable frequency selection from 50–500 Hz.
• LED CLIPPING INDICATOR RINGS An LED clipping indicator ring that surrounds each input level potentiometer lets your customers quickly set their amplifier’s input sensitivity, without the need for additional test equipment.
• BUILT STRONG AND SMART Featuring a sleek industrial design with molded end caps and an aluminum extruded chassis, the JD series’ power indicator and protection LED indicators shine from behind a simple black logo bar on the top surface of the amplifier.

Specs

• Channels 5
• Physical dimensions (Height) 2.10" (53 mm)
• Physical dimensions (Width) 11.86" (242 mm)
• Physical dimensions (Depth) 7.50" (190 mm)
• Amplifier class Class D
• Rated continuous (RMS) power (14.4 V input @ 4 Ohm < 1% THD) Main: 75 W x 4 Sub: 180 W x 1
• Rated continuous (RMS) power (14.4 V input @ 2 Ohm < 1% THD) Main: 100 W x 4 Sub: 300 W x 1
• Rated continuous (RMS) power (12.5 V input @ 4 Ohm < 1% THD) Main: 60 W x 4 Sub: 180 W x 1
• Rated continuous (RMS) power (12.5 V input @ 2 Ohm < 1% THD) Main: 90 W x 4 Sub: 300 W x 1
• Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs - Main Channels >104 dB
• Signal-to-Noise Ratio, referred to highest rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs - Subwoofer Channel >80 dB
• Damping factor @ 4 ohm >150/50 Hz
• Damping factor @ 2 ohm >75/50 Hz
• THD+N @ Rated Power: Main Channels <1% @ 2 ohm per Channel
• Frequency response (+0, -1dB) 12 Hz-22 kHz
• Input voltage range @ RCA inputs Switchable from 200 mV-2 V RMS (Low) to 800 mV-8 V RMS (High)
• Fuse rating 40 A
• Recommended fuse type(s) AFS, AGU or MaxiFuse
• Min. copper power/Ground wire gauge 4 AWG wire