We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Out of stock
SKU
JX4004D
JL Audio JX400/4D
4-channel Class D Full Range Amplifier 400w Max
$199.99
Did you find this item priced lower somewhere else?
YES
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ω | 70 W RMS x 4 |
| @ 2 Ω | 100 W RMS x 4 |
| Bridged @ 4Ω | 200 W RMS x 2 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ω | 50 W RMS x 4 |
| @ 2 Ω | 80 W RMS x 4 |
| Bridged @ 4Ω | 160 W RMS x 2 |
General Specifications
| Frequency Response | 20 Hz - 20 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >93 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >76 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >60 / 50 Hz |
| Damping Factor @ 2 Ω | >30 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Input Voltage Range @ High-Level Inputs | 2 V - 10 V RMS |
| Min Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 40 A (AFS, AGU or MaxiFuse™) |
Signal Processing
| Filter Modes | Low-Pass or High-Pass |
| Filter Slope (dB/Octave) | 12dB |
| Filter Frequency Range | 50-200 Hz |
| Detented, Calibrated Filter Freq. Potentiometers | No |
| Filter Defeatable? | Yes |
| Remote Level Control | No |
| Remote Level Modes | N/A |
| Channel Input Mode Switch | Yes (2/4 ch.) |
| Pass-Through Preamp Output Type | Unbuffered |
| Source Channel Selection for PreOuts | No (always 2 Ch) |
Physical Specifications
| Height (H) | 2.15 in / 55 mm |
| Width (W) | 9.05 in / 230 mm |
| Depth (D) | 7.68 in / 195 mm |
| Net Weight | 4.80 lb / 2.18 kg |
More Information
Price
$199.99
Condition
New
Manufacturer
JL Audio
Description
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ω | 70 W RMS x 4 |
| @ 2 Ω | 100 W RMS x 4 |
| Bridged @ 4Ω | 200 W RMS x 2 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ω | 50 W RMS x 4 |
| @ 2 Ω | 80 W RMS x 4 |
| Bridged @ 4Ω | 160 W RMS x 2 |
General Specifications
| Frequency Response | 20 Hz - 20 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >93 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >76 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >60 / 50 Hz |
| Damping Factor @ 2 Ω | >30 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Input Voltage Range @ High-Level Inputs | 2 V - 10 V RMS |
| Min Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 40 A (AFS, AGU or MaxiFuse™) |
Signal Processing
| Filter Modes | Low-Pass or High-Pass |
| Filter Slope (dB/Octave) | 12dB |
| Filter Frequency Range | 50-200 Hz |
| Detented, Calibrated Filter Freq. Potentiometers | No |
| Filter Defeatable? | Yes |
| Remote Level Control | No |
| Remote Level Modes | N/A |
| Channel Input Mode Switch | Yes (2/4 ch.) |
| Pass-Through Preamp Output Type | Unbuffered |
| Source Channel Selection for PreOuts | No (always 2 Ch) |
Physical Specifications
| Height (H) | 2.15 in / 55 mm |
| Width (W) | 9.05 in / 230 mm |
| Depth (D) | 7.68 in / 195 mm |
| Net Weight | 4.80 lb / 2.18 kg |
Warranty
2 Years
Minimum Advertised Price
$290.00
Write Your Own Review
Related Products
Check items to add to the cart or
