JL Audio AP600/6

POWER THE MOMENT

With these tough and ultracompact amplifiers, customers can enjoy every note from every part of their boat.

Part Number: 010-03430-00

Key Features

• Efficient class-D design
• Built-in LCD display for manual control
• Ignition protected and IP67-rated (excluding cables)
• Easy tune feature

Features

• 600-WATT 6 CHANNEL AMPLIFIER: This staggered-power 6 channel amplifier can power up to a maximum of six pairs of speakers or four pairs of speakers and one subwoofer.
• EASY TUNE FEATURE: For additional optimization, pair with a Fusion stereo with built-in DSP, and download the Fusion Audio app for selectable profiles. This enables the Easy Tune feature, which streamlines amplifier setup to ensure superior sound quality and system protection.
• CLASS-D AMPLIFIER TECHNOLOGY: The highly efficient Class-D design provides lower battery drain with a higher output than Class-AB amplifiers. This delivers increased power to the connected speakers/subwoofers for an enhanced level of audio performance.
• RUGGED DESIGN: These amplifiers offer superior levels of durability and are built to IP67 standards (excluding cables) to withstand abuse in harsh marine environments.

Specs

• Channels 6 Channel
• Physical dimensions (Height) 1.86" (47 mm)
• Physical dimensions (Width) 6 Channel: 11.81" (300 mm)
• Physical dimensions (Depth) 6 Channel: 5.90" (150 mm)
• Operating voltage 9-16 VDC
• Water and dust rating IP67
• Operating temperature range 4° to 149° F (-20° to 65° C)
• Amplifier class Class D
• Rated continuous (RMS) power (14.4 V input @ 4 Ohm < 1% THD) 6-Channel: Channels 1-4: 50 W x 4/150 W x 2 (Bridged); Channels 5-6: 100 W x 2/300 x 1 (Bridged)
• Rated continuous (RMS) power (14.4 V input @ 2 Ohm < 1% THD) 6-Channel: Channels 1-4: 75 W x 4; Channels 5-6: 150 W x 2
• Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs >70 dB
• Frequency response (+0, -1dB) 6-Channel: 20 Hz-20 kHz
• Input sensitivity @ RCA inputs Switchable from 200 mV-2 V RMS (Low) to 800 mV-8 V RMS (High)
• Input impedance 11 kohm (High) 20 kohm (Low)
• Current consumption (Standby) <1mA
• Current consumption (Idle) 6 Channel: 1000mA-1500mA
• Fuse rating 6 Channel: 70A
• Recommended fuse type(s) AFS, AGU or MaxiFuse
• Min. copper power/Ground wire gauge 4 AWG wire