We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
In stock
SKU
AP2004BT
JL Audio AP200/4BT
4-channel Class D Marine amplifier
$549.99
Did you find this item priced lower somewhere else?
YES
POWER THE MOMENT
With this tough and ultracompact 4 channel amplifier featuring Bluetooth technology, you can enjoy every note from every part of your boat.
Part Number: 010-03431-00
Key Features
- Efficient class-D design
- Stream audio with Bluetooth technology
- Includes wired remote
- Ignition protected and IP67-rated (excluding cables)
- Compact build
Features
- CLASS-D AMPLIFIER TECHNOLOGY:The highly efficient Class-D design provides lower battery drain with a higher output than Class-AB amplifiers. This delivers increased power to the connected speakers/subwoofers for an enhanced level of audio performance.
- STREAM ON THE GO:This amplifier pairs with your customers compatible smartphone for seamless audio streaming and includes a wired remote that can be flush-, surface- or bar-mounted. Its compact size makes it a perfect addition to your customers small boat, jet ski or overland vehicle.
- RUGGED DESIGN:The included remote is IPX7-rated and the amplifier is built to IP67 standards (excluding cables) to withstand abuse in harsh marine environments.
Specs
- Channels: 4 Channel
- Physical dimensions (Height): 1.85" (47 mm)
- Physical dimensions (Width): 7.28" (185 mm)
- Physical dimensions (Depth): 4.90" (125 mm)
- Operating voltage: 9–16 VDC
- Water and dust rating: IP67
- Operating temperature range: 4° to 149° F (-20° to 65° C)
- Amplifier class: Class D
- Rated continuous (RMS) power (14.4 V input @ 4 Ohm < 1% THD): 40 W x 4 / 100 W x 2 (Bridged)
- Rated continuous (RMS) power (14.4 V input @ 2 Ohm < 1% THD): 50 W x 4
- Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth) Analog Inputs: >70 dB
- THD+N @ Rated Power: <1% @ 4 Ω per Channel
- Frequency response (+0, -1dB): 20 Hz–20 kHz
- Input voltage range @ RCA inputs: Switchable from 200 mV–2 V RMS (Low) to 800 mV–8 V RMS (High)
- Input impedance: 11 kΩ (High), 20 kΩ (Low)
- Current consumption (Standby): <1 mA
- Current consumption (Idle): <700–750 mA
- Fuse rating: 35 A
- Recommended fuse type(s): AFS, AGU, or MaxiFuse
- Min. copper power/Ground wire gauge: 4 AWG wire
- Protection circuits: Input under/over voltage, Over temperature, Output short circuit
More Information
Price
$549.99
Condition
New
Manufacturer
JL Audio
Description
POWER THE MOMENT
With this tough and ultracompact 4 channel amplifier featuring Bluetooth technology, you can enjoy every note from every part of your boat.
Part Number: 010-03431-00
Key Features
- Efficient class-D design
- Stream audio with Bluetooth technology
- Includes wired remote
- Ignition protected and IP67-rated (excluding cables)
- Compact build
Features
- CLASS-D AMPLIFIER TECHNOLOGY:The highly efficient Class-D design provides lower battery drain with a higher output than Class-AB amplifiers. This delivers increased power to the connected speakers/subwoofers for an enhanced level of audio performance.
- STREAM ON THE GO:This amplifier pairs with your customers compatible smartphone for seamless audio streaming and includes a wired remote that can be flush-, surface- or bar-mounted. Its compact size makes it a perfect addition to your customers small boat, jet ski or overland vehicle.
- RUGGED DESIGN:The included remote is IPX7-rated and the amplifier is built to IP67 standards (excluding cables) to withstand abuse in harsh marine environments.
Specs
- Channels: 4 Channel
- Physical dimensions (Height): 1.85" (47 mm)
- Physical dimensions (Width): 7.28" (185 mm)
- Physical dimensions (Depth): 4.90" (125 mm)
- Operating voltage: 9–16 VDC
- Water and dust rating: IP67
- Operating temperature range: 4° to 149° F (-20° to 65° C)
- Amplifier class: Class D
- Rated continuous (RMS) power (14.4 V input @ 4 Ohm < 1% THD): 40 W x 4 / 100 W x 2 (Bridged)
- Rated continuous (RMS) power (14.4 V input @ 2 Ohm < 1% THD): 50 W x 4
- Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth) Analog Inputs: >70 dB
- THD+N @ Rated Power: <1% @ 4 Ω per Channel
- Frequency response (+0, -1dB): 20 Hz–20 kHz
- Input voltage range @ RCA inputs: Switchable from 200 mV–2 V RMS (Low) to 800 mV–8 V RMS (High)
- Input impedance: 11 kΩ (High), 20 kΩ (Low)
- Current consumption (Standby): <1 mA
- Current consumption (Idle): <700–750 mA
- Fuse rating: 35 A
- Recommended fuse type(s): AFS, AGU, or MaxiFuse
- Min. copper power/Ground wire gauge: 4 AWG wire
- Protection circuits: Input under/over voltage, Over temperature, Output short circuit
Warranty
2 Years
Minimum Advertised Price
$750.00
Write Your Own Review
Related Products
Check items to add to the cart or
