We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
In stock
SKU
AP3001
JL Audio AP300/1
Monoblock Compact Marine amplifier w/ Bluetooth Technology
$499.99
Did you find this item priced lower somewhere else?
YES
POWER THE MOMENT
With these tough and ultracompact amplifiers, customers can enjoy every note from every part of their boat.
Part Number: 010-03428-00
Key Features
- Efficient class-D design
- Built-in LCD display for manual control
- Ignition protected and IP67-rated (excluding cables)
- Easy tune feature
Features
- 300-WATT MONOBLOCK AMPLIFIER: This monoblock amplifier is specifically designed to power a subwoofer.
- EASY TUNE FEATURE: For additional optimization, pair with a Fusion stereo with built-in DSP, and download the Fusion Audio app for selectable profiles. This enables the Easy Tune feature, which streamlines amplifier setup to ensure superior sound quality and system protection.
- CLASS-D AMPLIFIER TECHNOLOGY: The highly efficient Class-D design provides lower battery drain with a higher output than Class-AB amplifiers. This delivers increased power to the connected speakers/subwoofers for an enhanced level of audio performance.
- RUGGED DESIGN: These amplifiers offer superior levels of durability and are built to IP67 standards (excluding cables) to withstand abuse in harsh marine environments.
Specs
- Channels Monoblock
- Physical dimensions (Height) 1.86" (47 mm)
- Physical dimensions (Width) Monoblock 10.43" (265 mm)
- Physical dimensions (Depth) Monoblock 4.90" (125 mm)
- Operating voltage 9-16 VDC
- Water and dust rating IP67
- Operating temperature range 4° to 149° F (-20° to 65° C)
- Amplifier class Class D
- Rated continuous (RMS) power (14.4 V input @ 4 Ohm < 1% THD) Monoblock: 200 W x 1
- Rated continuous (RMS) power (14.4 V input @ 2 Ohm < 1% THD) Monoblock: 350 W x 1
- Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs >70 dB
- Frequency response (+0, -1dB) Monoblock: 10 Hz-500 Hz
- Input sensitivity @ RCA inputs Switchable from 200 mV-2 V RMS (Low) to 800 mV-8 V RMS (High)
- Input impedance 11 kohm (High) 20 kohm (Low)
- Current consumption (Standby) <1mA
- Current consumption (Idle) Monoblock: 700-750mA
- Fuse rating Monoblock: 35A
- Recommended fuse type(s) AFS, AGU or MaxiFuse
- Min. copper power/Ground wire gauge 4 AWG wire
More Information
Price
$499.99
Condition
New
Manufacturer
JL Audio
Description
POWER THE MOMENT
With these tough and ultracompact amplifiers, customers can enjoy every note from every part of their boat.
Part Number: 010-03428-00
Key Features
- Efficient class-D design
- Built-in LCD display for manual control
- Ignition protected and IP67-rated (excluding cables)
- Easy tune feature
Features
- 300-WATT MONOBLOCK AMPLIFIER: This monoblock amplifier is specifically designed to power a subwoofer.
- EASY TUNE FEATURE: For additional optimization, pair with a Fusion stereo with built-in DSP, and download the Fusion Audio app for selectable profiles. This enables the Easy Tune feature, which streamlines amplifier setup to ensure superior sound quality and system protection.
- CLASS-D AMPLIFIER TECHNOLOGY: The highly efficient Class-D design provides lower battery drain with a higher output than Class-AB amplifiers. This delivers increased power to the connected speakers/subwoofers for an enhanced level of audio performance.
- RUGGED DESIGN: These amplifiers offer superior levels of durability and are built to IP67 standards (excluding cables) to withstand abuse in harsh marine environments.
Specs
- Channels Monoblock
- Physical dimensions (Height) 1.86" (47 mm)
- Physical dimensions (Width) Monoblock 10.43" (265 mm)
- Physical dimensions (Depth) Monoblock 4.90" (125 mm)
- Operating voltage 9-16 VDC
- Water and dust rating IP67
- Operating temperature range 4° to 149° F (-20° to 65° C)
- Amplifier class Class D
- Rated continuous (RMS) power (14.4 V input @ 4 Ohm < 1% THD) Monoblock: 200 W x 1
- Rated continuous (RMS) power (14.4 V input @ 2 Ohm < 1% THD) Monoblock: 350 W x 1
- Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz - 20 kHz noise bandwidth): Analog Inputs >70 dB
- Frequency response (+0, -1dB) Monoblock: 10 Hz-500 Hz
- Input sensitivity @ RCA inputs Switchable from 200 mV-2 V RMS (Low) to 800 mV-8 V RMS (High)
- Input impedance 11 kohm (High) 20 kohm (Low)
- Current consumption (Standby) <1mA
- Current consumption (Idle) Monoblock: 700-750mA
- Fuse rating Monoblock: 35A
- Recommended fuse type(s) AFS, AGU or MaxiFuse
- Min. copper power/Ground wire gauge 4 AWG wire
Warranty
2 Years
Minimum Advertised Price
$750.00
Write Your Own Review
Related Products
Check items to add to the cart or
