We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
In stock
SKU
XDM3001
JL AUDIO XDM3001
Monoblock, Class D, Car/Marine Subwoofer Amplifier, 300 W
$499.99
Did you find this item priced lower somewhere else?
YES
JL AUDIO XDM300/1 Monoblock, Class D, Car/Marine Subwoofer Amplifier, 300 W
General Features:
Monoblock Class D Car/Marine Subwoofer Amplifier, 300 W x 1 @ 2 Ω / 200 W x 1 @ 4 Ω - 14.4V
This little monoblock powerhouse employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output for its size. It is small enough to fit in most tight space applications, including small boats, pickups, motorcycles and UTV’s (in a weather-tight compartment).
Designed for car or boat installations, the XDM300/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Targeted specifically for subwoofer applications, the XDM300/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Rated Continuous (RMS) Power @ 14.4 V
- @ 4 Ω 200 W RMS x 1
- @ 3 Ω 250 W RMS x 1
- @ 2 Ω 300 W RMS x 1
- @ 1.5 Ω N/A
Rated Continuous (RMS) Power @ 12.5 V
- @ 4 Ω 160 W RMS x 1
- @ 3 Ω 210 W RMS x 1
- @ 2 Ω 270 W RMS x 1
- @ 1.5 Ω N/A
General Specifications
- Frequency Response 10 Hz - 1 kHz (+0, -1dB)
- S/N Ratio, referred to highest rated power >100 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W >80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Damping Factor @ 4 Ω >120 / 50 Hz
- Damping Factor @ 2 Ω >60 / 50 Hz
- THD+N @ Rated Power <1% @ 2 Ω per Ch.
- Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS
- Min.Copper Power / Ground Wire Gauge 8 AWG wire
- Fuse Rating 30 A (AFS, AGU or MaxiFuse™)
Signal Processing:
- Filter Mode(s) Low-Pass only
- Filter Slope(s) 12/24 dB/octave
- Filter Frequency Range 50 Hz - 500 Hz
- Detented, Calibrated Filter Freq. Potentiometer Yes
- Filter Defeat Function Yes
- Infrasonic Filter none
- Bass Boost EQ No
- Output Polarity Switch No
- Remote Subwoofer Level Control Optional HD-RLC or MHD-RLC (water-resistant)
- Remote Bass EQ Boost Control No
- Pass-Through Preamp Output Buffered
More Information
Price
$499.99
Condition
New
Manufacturer
JL Audio
Description
JL AUDIO XDM300/1 Monoblock, Class D, Car/Marine Subwoofer Amplifier, 300 W
General Features:
Monoblock Class D Car/Marine Subwoofer Amplifier, 300 W x 1 @ 2 Ω / 200 W x 1 @ 4 Ω - 14.4V
This little monoblock powerhouse employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output for its size. It is small enough to fit in most tight space applications, including small boats, pickups, motorcycles and UTV’s (in a weather-tight compartment).
Designed for car or boat installations, the XDM300/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Targeted specifically for subwoofer applications, the XDM300/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Rated Continuous (RMS) Power @ 14.4 V
- @ 4 Ω 200 W RMS x 1
- @ 3 Ω 250 W RMS x 1
- @ 2 Ω 300 W RMS x 1
- @ 1.5 Ω N/A
Rated Continuous (RMS) Power @ 12.5 V
- @ 4 Ω 160 W RMS x 1
- @ 3 Ω 210 W RMS x 1
- @ 2 Ω 270 W RMS x 1
- @ 1.5 Ω N/A
General Specifications
- Frequency Response 10 Hz - 1 kHz (+0, -1dB)
- S/N Ratio, referred to highest rated power >100 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W >80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Damping Factor @ 4 Ω >120 / 50 Hz
- Damping Factor @ 2 Ω >60 / 50 Hz
- THD+N @ Rated Power <1% @ 2 Ω per Ch.
- Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS
- Min.Copper Power / Ground Wire Gauge 8 AWG wire
- Fuse Rating 30 A (AFS, AGU or MaxiFuse™)
Signal Processing:
- Filter Mode(s) Low-Pass only
- Filter Slope(s) 12/24 dB/octave
- Filter Frequency Range 50 Hz - 500 Hz
- Detented, Calibrated Filter Freq. Potentiometer Yes
- Filter Defeat Function Yes
- Infrasonic Filter none
- Bass Boost EQ No
- Output Polarity Switch No
- Remote Subwoofer Level Control Optional HD-RLC or MHD-RLC (water-resistant)
- Remote Bass EQ Boost Control No
- Pass-Through Preamp Output Buffered
Power
300 W x 1 @ 2 Ω / 200 W x 1 @ 4 Ω - 14.4V
Warranty
1 Year
Write Your Own Review