We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
In stock
SKU
XDM6001
JL AUDIO XDM6001
Monoblock, Class D, Car/Marine Subwoofer Amplifier, 600 W
$599.99
Did you find this item priced lower somewhere else?
YES
JL AUDIO XDM600/1 Monoblock, Class D, Car/Marine Subwoofer Amplifier, 600 W
General Features:
Monoblock Class D Car/Marine Subwoofer Amplifier, 600 W x 1 @ 2 Ω / 400 W x 1 @ 4 Ω - 14.4V
This potent monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output from a very compact chassis. Don't let its small size fool you, though... the XDM/600/1 generates serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).
Designed for car or boat installations, the XDM600/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Targeted specifically for subwoofer applications, the XDM600/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Rated Continuous (RMS) Power @ 14.4 V
- @ 4 Ω400 W RMS x 1
- @ 3 Ω500 W RMS x 1
- @ 2 Ω600 W RMS x 1
- @ 1.5 Ω N/A
Rated Continuous (RMS) Power @ 12.5 V
- @ 4 Ω300 W RMS x 1
- @ 3 Ω400 W RMS x 1
- @ 2 Ω500 W RMS x 1
- @ 1.5 ΩN/A
General Specifications
- Frequency Response7 Hz - 500 Hz (+0, -1dB)
- S/N Ratio, referred to highest rated power>87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W>67 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Damping Factor @ 4 Ω>1000 / 50 Hz
- Damping Factor @ 2 Ω>500 / 50 Hz
- THD+N @ Rated Power<1% @ 2 Ω per Ch.
- Input Voltage Range @ RCA Inputs200 mV - 4 V RMS
- Min.Copper Power / Ground Wire Gauge
- 4 AWG wireFuse Rating50 A (AFS, AGU or MaxiFuse™)
Signal Processing
- Filter Mode(s)Low-Pass only
- Filter Slope(s)12/24 dB/octave
- Filter Frequency Range 50 Hz - 500 Hz
- Detented, Calibrated Filter Freq. Potentiometer Yes
- Filter Defeat FunctionYesInfrasonic Filter 30 Hz, defeatable
- Bass Boost EQ No
- Output Polarity Switch No
- Remote Subwoofer Level Control Optional HD-RLC or MHD-RLC (water-resistant)
- Remote Bass EQ Boost ControlNo
- Pass-Through Preamp Output Buffered
More Information
Price
$599.99
Condition
New
Manufacturer
JL Audio
Description
JL AUDIO XDM600/1 Monoblock, Class D, Car/Marine Subwoofer Amplifier, 600 W
General Features:
Monoblock Class D Car/Marine Subwoofer Amplifier, 600 W x 1 @ 2 Ω / 400 W x 1 @ 4 Ω - 14.4V
This potent monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output from a very compact chassis. Don't let its small size fool you, though... the XDM/600/1 generates serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).
Designed for car or boat installations, the XDM600/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Targeted specifically for subwoofer applications, the XDM600/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Rated Continuous (RMS) Power @ 14.4 V
- @ 4 Ω400 W RMS x 1
- @ 3 Ω500 W RMS x 1
- @ 2 Ω600 W RMS x 1
- @ 1.5 Ω N/A
Rated Continuous (RMS) Power @ 12.5 V
- @ 4 Ω300 W RMS x 1
- @ 3 Ω400 W RMS x 1
- @ 2 Ω500 W RMS x 1
- @ 1.5 ΩN/A
General Specifications
- Frequency Response7 Hz - 500 Hz (+0, -1dB)
- S/N Ratio, referred to highest rated power>87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W>67 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Damping Factor @ 4 Ω>1000 / 50 Hz
- Damping Factor @ 2 Ω>500 / 50 Hz
- THD+N @ Rated Power<1% @ 2 Ω per Ch.
- Input Voltage Range @ RCA Inputs200 mV - 4 V RMS
- Min.Copper Power / Ground Wire Gauge
- 4 AWG wireFuse Rating50 A (AFS, AGU or MaxiFuse™)
Signal Processing
- Filter Mode(s)Low-Pass only
- Filter Slope(s)12/24 dB/octave
- Filter Frequency Range 50 Hz - 500 Hz
- Detented, Calibrated Filter Freq. Potentiometer Yes
- Filter Defeat FunctionYesInfrasonic Filter 30 Hz, defeatable
- Bass Boost EQ No
- Output Polarity Switch No
- Remote Subwoofer Level Control Optional HD-RLC or MHD-RLC (water-resistant)
- Remote Bass EQ Boost ControlNo
- Pass-Through Preamp Output Buffered
Power
600 W x 1 @ 2 Ω / 400 W x 1 @ 4 Ω - 14.4V
Warranty
1 Year
Write Your Own Review