We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
In stock
SKU
6SPKSYS
Infinity Kappa 6SPKSYS
Six Speaker audio system in compatible w/ H-D Road Glide & Street Glide Motorcycles equipped w/ factory fairing
$2,699.95
Did you find this item priced lower somewhere else?
YES
Infinity Kappa 6SPKSYS Kappa Perfect 6.5in Speakers, 6x9" Speakers & 4channel amplifier, with all installation equipment provided, for 2014 & Up Harley Davidson Road Glide & Street Glide Motorcycle Fairings, Tour Pak & Saddle Bags
General Features:
KP5004
- RMS Power: 75Wx4 @ 4-ohm / 125Wx4 @ 2-ohm / 250Wx2 @ 4-ohm
- Selectable Crossover:
- Front: High-Pass @ Full/60/80/120Hz
- Rear: All-Pass, High-Pass, or Low-Pass @ 60/80/120Hz
- Frequency Response: 20Hz to 20kHz
- THD: <1%
- Fuse Rating: 40A
- Dimensions: 200mm x 85mm x 45mm
- All wires terminated with Molex or Molex-style connectors
600X (4)
- component speaker system includes 2 woofers and 2 tweeters with inline crossovers
- 6-1/2" Plus One basalt fiber woofer cone with hi-roll rubber surround
- 1" edge-driven polyphenylene sulfide dome tweeter
- removable tweeter works with component and coaxial configurations
- IPX5 weather-resistance rating
- Street Glide, Road Glide, and Tour Pak grilles included
- handles up to 80 watts RMS (240 watts peak power)
- frequency response: 60-20,000 Hz
- sensitivity: 95 dB at 2.83 volts
- grilles included
900XS (2)
- component speaker system includes 2 woofers and 2 tweeters with inline crossovers
- 6"x9" Plus One basalt fiber woofer cone with hi-roll rubber surround
- edge-driven polyphenylene sulfide dome tweeter
- removable tweeter works with component and coaxial configuration
- handles up to 100 watts RMS (300 watts peak power)
- frequency response: 50-20,000 Hz
- sensitivity: 95 dB at 2.83 volts
- grilles included
BCDSPXHD2
Flash the Factory Radio
Integration technology allows the DSP to reflash the factory radio for a flat response curve, without the need for external equipment. This reduces the cost, saves time, and allows installers to provide better service with complete control over the upgrade.
Digital Signal Processor + Interface
Enhance your sound system with a DSP that reflashes the OE radio and gives you full tuning control from the palm of your hand. Designed for easy integration with aftermarket or factory audio systems and easy expansion with amplifiers or other devices. Refer to the vehicle applications tab or chart for more information.
Important information
The Saddle Tramp DSP is a device that allows a user to flash the Harley-Davidson® radio to a 4-channel, flat audio output curve; but when the device is connected, it locks itself to the vehicle’s identification number (VIN), saving the last known state of the radio into memory. In order to unlock the Saddle Tramp DSP and use it on a different vehicle, or return it, you must remove the flash from the motorcycle, returning the radio back to factory settings. This can only be done 3 times in total. In the event that this product needs to be returned to the manufacturer, it cannot be locked to a motorcycle’s VIN.
Built-in Integration and Easy Installation
- Small footprint for easy installation behind the fairing
- BC-9715 pre-wired harness included for ease of installation
- Retains balance and fade control
- Built-in clipping detection and limiting circuits
- Bass knob included
- Water-resistant case & connections
- Micro-B USB updatable
- Upgrade Your Music Experience and Customize Your Sound
10 channels of output from the DSP
- 31-band graphic EQ, or 5 band parametric EQ per channel
- 4 selectable crossover slopes (12, 24, 36, or 48db per octave)
- Built-in selectable crossover per channel (high, low & band) to achieve the perfect sound
- Independent equalization for front, rear, and subwoofer
- Time delay circuit per channel (front and rear channels can be delayed independently up to 10ms)
- All programming is done using the AXXESS DSP XL app on Android devices ONLY
- Read, write, and store configurations for future recall
- Optional password protection feature for tuning control via the mobile app
Harley-Davidson®
- Works with 4- Button
- Works with 8- Button
- Works with Touchscreen
BC-9720 Backbone Rear Speaker Extension Harness
- 4-pin backbone harness for adding rear speakers
- Matches Harley Davidson® wiring configuration
- 18GA OFC wires with OE connectors
- Works with BC-9721 splitter
- Used when adding the BC-9716 harness
Harley-Davidson®
- Hard Saddlebag 1998-Up*
*1998-2013 applications require the BC-9716 to use this harness
*Some models without factory installed rear audio may require a radio flash to activate the rear audio output.
BC-9723 Saddle Bag Speaker Harness
- Saddlebag speaker wiring harness
- Matches Harley Davidson® wiring configuration
- Plugs into OE backbone harness or BC-9720
- Used when adding the BC-9716 harness
- Quick disconnect harnesses when removing saddlebags
- Water-tight grommet included
- For use with all Saddle Tramp bag lids
- Sold as pair
Harley Davidson®
- Hard Saddlebag 1998-Up*
*1998-2013 applications require the BC-9716 to use this harness
*Some models without factory installed rear audio may require a radio flash to activate the rear audio output.
BCAMP04
- Fits all Harley Davidson Road Glide® 2015 – Up
- No drilling required
- Steel construction with UV powder coating
- Pre-drilled for Metra PowerSports Amps (MPS-AMP60x4, MPS-AMP100x2 or MPS-AMP200-2D)
- Works with most other micro amps
Note: Requires four 1/4-20 Bolts .75" long (not supplied) to attach
Harley Davidson
- Road Glide® FLT 2015-Up
BC9703
Amp Wiring Kit for Front Fairing
Installing aftermarket amplifiers in the front fairings of your Harley-Davidson® motorcycle? This single or dual amp installation kit will make wiring your connections so much easier! Constructed with oxygen-free copper for the best possible conductivity and audio performance. Refer to the vehicle applications tab or chart for more information.
- Single or dual amp installation harness
- Designed for installing aftermarket amplifiers in front fairings
- Oxygen-free copper wiring for better conductivity and performance
- Quick disconnect for each amplifier
- 3-year limited warranty
- What’s in the box:
- 8-gauge 5.5ft power and ground wires
- Over mold split to (2) 10-gauge power and ground wires
- 60-amp mini ANL fuse and holder
- Ignition T-harness included for amp turn-on
Harley-Davidson®
- FLH/FLT 2014-Up
BC9726
- OE amplifier bypass harnesses
- (1) front amp bypass all CVO 14+
- (1) Tour Pak® amp bypass 14+ (rear)
- (1) Left saddlebag amp bypass 14+ (rear)
- (1) Right saddlebag amp bypass 18+CVO SG only
- (2) Saddlebag speaker plugs 14+ and 11-13 CVO SG/RG
Harley Davidson®
- FLH 2014-Up
- FLT 2014-Up
BCAMP06
Saddle Tramp® has a new amp mounting plate for Harley-Davidson® Street Glide motorcycles; the BC-AMP06. This product is installed on top of the OE radio tray and reuses the factory bolts. The kit includes a hook and loop pad and cable ties. The mounting plate is black powder-coated steel with slots around the outside edge which can be used to secure the wiring for the amplifier with the supplied cable ties. Original fairings on these motorcycle models offer adequate space for aftermarket amps.
- Durable steel construction
- Black powder coat
- Uses OE bolts for mounting
- OE harness mounting points
- Multiple zip tie location to secure wire to bracket
- Velcro pad included
Harley-Davidson®
- Street Glide 2014-Up
More Information
Price
$2,699.95
Condition
New
Manufacturer
Infinity
Impedance
4 Ω
Warranty
1 Year
Write Your Own Review