We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
In stock
SKU
P22X12+P500X1BD
Rockford Fosgate P22X12 w/ P500X1BD
Mono subwoofer amplifier 500 watts RMS x 1 at 1 ohm with Ported enclosure with two 12" Punch P2 subwoofers
$889.98
Did you find this item priced lower somewhere else?
YES
Rockford Fosgate Punch P500X1bd Mono subwoofer amplifier 500 watts RMS x 1 at 1 ohm with P2-2X12 Ported enclosure with two 12" Punch P2 subwoofers
Rockford Fosgate Punch P500X1bd
Mono subwoofer amplifier — 500 watts RMS x 1 at 1 ohm
Product highlights:
- mono subwoofer amplifier
- 150 watts RMS x 1 at 4 ohms (300 watts RMS x 1 at 2 ohms)
- 500 watts RMS x 1 at 1 ohm
- CEA-2006 compliant
- Features:
- variable low-pass filter filter (50-250 Hz, 12 dB/octave)
- selectable subsonic filter (28Hz, 12 dB/octave)
- variable PEQ2 bass boost (0-18 dB at 45 Hz)
- C.L.E.A.N. gain setup system includes test tone CD
- test tones also available as MP3 download from Amazon On Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup)
- Class-BD amplifier design
- frequency response: 20-250 Hz
- Dynamic Thermal Management and MEHSA MOSFET cooling systems
- MOSFET power and output stages
- preamp inputs and outputs
- speaker-level inputs (speaker wire to RCA adapter required, sold separately)
- signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead
More Info:
- optional PLC2 wired remote level control with clip light available (sold separately)
- 4-gauge power and ground leads and an 80-amp fuse recommended — wiring and hardware not included with amplifier
- no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended
- 11-1/8"W x 2-7/16"H x 8-13/16"D
Rockford Fosgate P2-2X12
Ported enclosure with two 12" Punch P2 subwoofers
Standout performance
Rockford Fosgate's P2-2X12 ported enclosure offers the extra power handling of Punch P2 12" subs, so you and your passengers can rock out to powerful bass.
Bulletproof bass
The enclosure houses two Punch P2 12" subs, each with a paper cone that's reinforced with Kevlar fibers and supported by a rubber surround. The heavy-duty motor assemblies and advanced cooling vents allow these subs to handle up to 400 watts RMS each without flinching. The subs are internally wired for a 1-ohm total impedance, so make sure your amp can power this enclosure safely.
Advanced port design
Rugged 5/8" medium-density fiberboard construction means this enclosure will hold strong for fat, heavy bass. Industrial-grade black carpet provides a clean, finished look, and protects your trunk from nicks and scratches. The spring terminals will accept bare wire, pin connectors, or banana plugs. This enclosure uses an advanced port design that promotes generous air movement, while reducing distortion-causing port noise, so you hear louder, deeper bass. Add an amp and some wiring, and feel the thick low end this enclosure adds to your ride.
Product highlights:
- ported hatchback-style enclosure with two 12" Punch P2 subwoofers
- 5/8" medium density fiberboard construction covered with black carpet
- 1-ohm total impedance
- power handling: 300-800 watts RMS
- peak power: 1600 watts
- frequency response: 27-250 Hz
- sensitivity: 86 dB
- 33-7/8"W x 15-1/4"H x 16-5/8"D1 x 14"D2
More Information
Price
$889.98
Condition
New
Manufacturer
Rockford Fosgate
Description
Rockford Fosgate Punch P500X1bd Mono subwoofer amplifier 500 watts RMS x 1 at 1 ohm with P2-2X12 Ported enclosure with two 12" Punch P2 subwoofers
Rockford Fosgate Punch P500X1bd
Mono subwoofer amplifier — 500 watts RMS x 1 at 1 ohm
Product highlights:
- mono subwoofer amplifier
- 150 watts RMS x 1 at 4 ohms (300 watts RMS x 1 at 2 ohms)
- 500 watts RMS x 1 at 1 ohm
- CEA-2006 compliant
- Features:
- variable low-pass filter filter (50-250 Hz, 12 dB/octave)
- selectable subsonic filter (28Hz, 12 dB/octave)
- variable PEQ2 bass boost (0-18 dB at 45 Hz)
- C.L.E.A.N. gain setup system includes test tone CD
- test tones also available as MP3 download from Amazon On Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup)
- Class-BD amplifier design
- frequency response: 20-250 Hz
- Dynamic Thermal Management and MEHSA MOSFET cooling systems
- MOSFET power and output stages
- preamp inputs and outputs
- speaker-level inputs (speaker wire to RCA adapter required, sold separately)
- signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead
More Info:
- optional PLC2 wired remote level control with clip light available (sold separately)
- 4-gauge power and ground leads and an 80-amp fuse recommended — wiring and hardware not included with amplifier
- no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended
- 11-1/8"W x 2-7/16"H x 8-13/16"D
Rockford Fosgate P2-2X12
Ported enclosure with two 12" Punch P2 subwoofers
Standout performance
Rockford Fosgate's P2-2X12 ported enclosure offers the extra power handling of Punch P2 12" subs, so you and your passengers can rock out to powerful bass.
Bulletproof bass
The enclosure houses two Punch P2 12" subs, each with a paper cone that's reinforced with Kevlar fibers and supported by a rubber surround. The heavy-duty motor assemblies and advanced cooling vents allow these subs to handle up to 400 watts RMS each without flinching. The subs are internally wired for a 1-ohm total impedance, so make sure your amp can power this enclosure safely.
Advanced port design
Rugged 5/8" medium-density fiberboard construction means this enclosure will hold strong for fat, heavy bass. Industrial-grade black carpet provides a clean, finished look, and protects your trunk from nicks and scratches. The spring terminals will accept bare wire, pin connectors, or banana plugs. This enclosure uses an advanced port design that promotes generous air movement, while reducing distortion-causing port noise, so you hear louder, deeper bass. Add an amp and some wiring, and feel the thick low end this enclosure adds to your ride.
Product highlights:
- ported hatchback-style enclosure with two 12" Punch P2 subwoofers
- 5/8" medium density fiberboard construction covered with black carpet
- 1-ohm total impedance
- power handling: 300-800 watts RMS
- peak power: 1600 watts
- frequency response: 27-250 Hz
- sensitivity: 86 dB
- 33-7/8"W x 15-1/4"H x 16-5/8"D1 x 14"D2
Warranty
1 Year
Write Your Own Review
Related Products
Check items to add to the cart or
