Maestro RR ADS-MRR Universal Radio Replacement & SWC Steering Wheel Interface iDatalink HRN-RR-GM4 Factory Integration Adapter + Freshener fits select 2016-up GM-made vehicles

Maestro RR ADS-MRR

Universal Radio Replacement & SWC Steering Wheel Interface

ADS- MRR Maestro RR Universal Radio Replacement & SWC Steering Wheel Interface

• allows installation of a new car stereo in select 2006-up Ford/Lincoln/Mercury, GM, Chrysler/Dodge/Jeep/RAM, Toyota/Scion, Honda/Acura, Fiat, Subaru, and Volkswagen/Audi vehicles
• works with required vehicle-specific harness (sold separately) to retain factory steering wheel audio controls, retain the factory amp if present, and integrate all car stereo connections
• retains factory convenience features (OnStar, SYNC, Uconnect, and more) with select Kenwood, Alpine, Pioneer, and JVC touchscreen receivers
• displays engine performance data on touchscreen with select Kenwood, JVC, Pioneer, Sony, and Alpine multimedia receivers
• dimensions: 4-1/8"W x 3/4"H x 2-7/8"D

iDatalink HRN-RR-GM4 Factory Integration Adapter

Connect an iDatalink-compatible car stereo and retain steering wheel controls and other features in select GM-made vehicles

• allows installation of a new receiver with an iDatalink port in select GM vehicles (also requires the Maestro ADS-MRR module)
• retains the use of your steering wheel audio controls
• retains OnStar and Bluetooth hands-free operation
• displays engine performance data on touchscreen

Features

Chevy/GMC Harness: The iDatalink Maestro HRN-RR-GM4 installation harness greatly simplifies the installation of the Maestro RR Car Radio Replacement Interface module (794ADSMRR, sold separately) in select Chevy & GM vehicles when replacing your factory radio with an iDatalink Serial Port compatible head unit from Kenwood, JVC, Alpine or Pioneer (click here for a list of fully compatible radios).

Note: This harness is only compatible with select Kenwood, JVC, Alpine, & Pioneer in-dash receivers that feature an iDatalink serial port for the Maestro RR Car Radio Replacement Interface Module. Not compatible with any other brand of aftermarket car stereo.

Vehicle Compatibility: The iDatalink Maestro HRN-RR-GM4 installation harness is compatible with the following Chevy & GM vehicles.

Amplifier Bypass: If your Chevy or GMC vehicle features a factory amplifier, the factory amp cannot be retained and must be bypassed or replaced with an aftermarket amplifier.

Retained Factory Features: When installing select Kenwood, JVC, Alpine, & Pioneer in-dash receivers which contain an iDatalink serial port, the HNR-RR-GM4 harness along with the iDatalink Maestro RR interface module allows you to retain the following GM factory features (if applicable).

• OnStar Service & Bluetooth Hands-Free
• Steering Wheel Controls
• Backup Camera
• Turn Signals & Warning Chimes (external chime module included)
• RAP (Retained Accessory Power)

Navigation Outputs: The iDatalink Maestro HRN-RR-GM4 installation harness provides the following outputs for installing an aftermarket navigation receiver - Parking Brake, Foot Brake, VSS (Vehicle Speed Sense), & Reverse Light.

Extra Features: The following Extra features are added when replacing your aftermarket head unit with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Pioneer, or Alpine (using the Maestro RR Car Radio Replacement Interface module and HNR-RR-GM4 harness.

• User Selectable Gauges
• Vehicle Information (Tire Pressure, Battery Voltage, Engine Codes, Door Open Status)
• Park Assist (Chimes & On-Screen Display)

Connections: The iDatalink Maestro HRN-RR-GM4 vehicle harness includes two Molex connectors which plug into your Chevy/GMC factory radio harness. On the other end of the harness are four multi-pin connectors which plug into the Maestro RR Car Radio Replacement Interface module  (794ADSMRR, sold separately). There is also a composite video RCA connector which plugs into the backup camera input on your compatible aftermarket head unit. In addition, you will need to hardwire the power/ground, illumination, speaker, and navigation output leads of the HRN-RR-GM4 harness to your aftermarket head unit's wiring harness. The external chime module will plug into the Maestro RR interface module.

Note: When using the HRN-RR-GM4 installation harness, you will not use the additional harnesses that are included with the Maestro RR Car Radio Replacement Interface module (794ADSMRR, sold separately).

Wire Code Chart:

Wire Color	Function
Red	+12 Volt Accessory
Yellow	+12 Volt Constant
Black	Ground
Blue/White	Amp Turn-On
Orange	Illumination
White	Left Front Speaker +
White/Black	Left Front Speaker -
Gray	Right Front Speaker +
Gray/Black	Right Front Speaker -
Green	Left Rear Speaker +
Green/Black	Left Rear Speaker -
Violet	Right Rear Speaker +
Violet/Black	Right Rear Speaker -
Pink	VSS
Violet/White	Reverse Gear
Light Green	Parking Brake
Yellow/black	Foot Brake