General Features:

• amplifier integration module and T-harness
  • add an aftermarket amplifier without removing factory amp
• works with select 2018-20 Toyota-built vehicles
• 6-channel RCA outputs (front, rear, sub)
• 5 volts RMS output
• retains most factory radio controls and audio features
  • does not retain speed-controlled volume, DSP, or surround sound mode
• wired remote level control for sub channels
• remote turn-on lead for amplifiers
• AmpPRO PC App, available from PAC, lets you adjust minimum volume and 3-band semi-parametric EQ via your Windows-run PC
• optional TOSLINK adapter provides digital output

Your amp will sound better than the factory system

You can make your Toyota's less-than-ideal factory system actually sound premium by upgrading the weak factory amplifier with a more powerful aftermarket amp. PAC's AmpPRO interface consists of a module and a vehicle-specific T-harness that make the job much easier. Now, you can install an amplifier of your own without losing any of your vehicle's factory audio features like warning chimes, navigation prompts, and Bluetooth® functions.

Simple to install

The package's T-harness plugs into the factory radio and vehicle harness. The small module fits behind the dash, converting your radio's speaker outputs into six preamp-level outputs ready for connection to your amps. The factory amplifier needs to be left connected in the vehicle. The factory radio controls, such as volume, balance, and fade, will work as before for your front and rear speakers. A separate wired remote level control lets you adjust the volume of the subwoofer channels from your front seat. An optional add-on module, PAC's APA-TOS1 adapter, provides an optical digital output for your high-end digital processors and amplifiers to handle.

An app for tweakers

After downloading the AmpPRO PC App and connecting to your Windows-run PC via USB, you can access the factory 3-band parametric equalizer (EQ) and customize the tone of your system to perfection. The app also lets you adjust the system's minimum volume level and update the product firmware when needed.

Important Note: This interface does not retain your factory radio's speed-controlled volume, DSP, or surround sound mode.

Installation Note: This AmpPRO interface simplifies the installation of a car amplifier (not included). You'll also need to purchase anything required to install your new amp: an amp wiring kit, speaker wire (to replace factory wiring), and RCA cables. 

Installation Note: If you plan on using your factory speaker wiring, PAC's APH-GM02 harness lets you tap into that wiring without having to cut any plugs. You'll need some extra speaker wire if you're locating your new amp away from the factory amp.