We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
JBL S2-1024SS (Factory Refurbished)
JBL S2-1024SS
Ported enclosure with one 10" S2-1024 subwoofer
- ported enclosure with one 10" subwoofer
- polypropylene cone and nitrile rubber surround
- Slipstream port
- switchable 2-ohm or 4-ohm impedance
- power handling: 250 watts RMS (1000 watts peak)
- frequency response: 30 Hz-175 Hz
- sensitivity: 92 dB
- dimensions: 22-1/2"W x 15-1/4"H x 12-1/2"D
General | ||
---|---|---|
Woofer Size (inches) | 10 | |
Woofer Material | Polypropylene | |
Enclosure Type | Ported | |
Color | Black | |
Pieces in System | 1 | |
Width (inches) | 22-1/2 | |
Height (inches) | 15-1/4 | |
Depth (inches) | 13 | |
Second Depth (inches) | 10 | |
Connector Type | Binding post | |
Frequency Response | 30-175 Hz | |
Power Range (Watts RMS) | 250 | |
Maximum Wattage | 1000 | |
Sensitivity | 92 dB | |
Impedance | 4 ohms |
Features
Selectable Smart Impedance (SSI): A switch on the input terminal allows you to easily change the woofer's impedance between 2Ω and 4Ω settings. (The connected amplifier should be off when changing the impedance.)
Slipstream Port: The JBL S2-1024SS has a Slipstream port on the front of the enclosure. The double-flared shape of the oversized port is precisely calculated to efficiently eliminate port noise. Even at high SPL, airflow through the port will remain uniform, offering better low-frequency extension and woofer protection. Because the area of the port in the middle is smaller than the mouth of the port, the port can be much shorter than a cylindrical port with a surface area the same as the Slipstream port's mouth; this means it can fit into smaller boxes.
Binding Post: The wire terminal, on the right side of the enclosure, features a pair of binding posts that will accept single banana plugs, pin connectors, spade lugs, and bare wire up to 10-gauge.