Out of stock
SKU
HCP4M+HMX65SLDX2

Hertz HCP4M Marine 4ch Amplifier + HMX65SLD (2 pair)

Marine 4ch amp + 6-1/2" 2-way marine speakers with LED lighting (Black)
$1,289.97
Did you find this item priced lower somewhere else? YES

Hertz HCP4M Marine 4ch Amplifier + (2 pair) Marine HMX65SLD 6-1/2" 2-way marine speakers with LED lighting (Black) Package

HCP4M Features:

Channel mode 4 - 3 - 2
Output Power (RMS)
@ 14.4 VDC
4 Ch: 65 W x 4 (4 Ω)
4 Ch: 95 W x 4 (2 Ω)
3 Ch: 65 W x 2 (4 Ω) + 190 W x 1 (4 Ω)
3 Ch: 95 W x 2 (2 Ω) + 190 W x 1 (4 Ω)
2 Ch: 190 W x 2 (4 Ω)
Filters
Bypass
Hi-Pass
Lo-Pass
Band-Pass


Yes
A/B: 80 Hz @ 12 dB/Oct.
A/B: 50 ÷ 500 Hz @ 12 dB/Oct.
-

Distortion - THD
(100Hz @ 4Ω)
0.01%
S/N Ratio
(A weighted @ 1V)
103 dB
Damping factor
(100Hz @ 4Ω)
120
Size W x D x H
mm (in.)
315 x 190 x 50 (12.40 x 7.48 x 1.97)

HCP 4M four channels  marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier. Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensure extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies. The HCP 4 M fourchannel model features also an extended frequency range filter, which can be used when designing active 2-way speaker systems.

HMX65SLD Feature:

    • 6-1/2" marine speakers (pair)
    • polypropylene woofer
    • Santoprene rubber surround
    • 1" neodymium dome tweeter
    • built-in RGB LED lighting
    • designed for marine applications
    • stainless steel tweeter grille
    • aramid fiber spider with silicone-insulated lead wires
    • gold-plated corrosion resistant terminals
    • designed for infinite baffle applications
    • built-in crossovers
Specs:
  • handles up to 75 watts RMS (150 peak)
  • frequency response 50-25,000 Hz
  • sensitivity: 89 dB
  • impedance: 4 ohms
  • mounting depth: 2-3/4"

High-performance speakers with LED light

Hertz designed their HMX 6.5 S-LD 6-1/2” marine speakers to bring high-quality audio and high style to your boat. These rugged speakers will handle up to 75 watts RMS, so they'll be able to cut through the noise from your engine and the wind. With big magnets, polypropylene cones, and acoustic lens tweeters optimized for off-axis dispersion, you'll love the sounds you hear.  The cool, built-in RGB LED lights look great, too.

Built-in LED light

These Hertz speakers bring something extra to the party – multi-color LED lighting. The RGB LED lighting circuit sits just below the tweeter and it's protected by a transparent cover that also acts as a light diffuser. In order to control the multi-color RBG, you'll need an RGB controller (sold separately).

Ready for action

The speaker basket and grille are made from a rugged, UV-resistant polymer that stands up to water, dust, and mud, while the stainless steel mesh grille protects the tweeter from both dirt and damage. Aramid fiber spiders, silicone-insulated leads, and Santoprene rubber surrounds also help keep these durable speakers rockin' for years to come.

About Hertz

When you think of Italian cars, you think of style, performance, and awesome sound. Same goes for Italian audio gear. Hertz speakers, subs, and amps have made cars sound super since 1998. Known for great sound and technological innovation, high-end gear from Hertz will bring powerful performance audio to any vessel.

More Information
Price
$1,289.97
Condition
New
Manufacturer
Hertz
Description

Hertz HCP4M Marine 4ch Amplifier + (2 pair) Marine HMX65SLD 6-1/2" 2-way marine speakers with LED lighting (Black) Package

HCP4M Features:

Channel mode 4 - 3 - 2
Output Power (RMS)
@ 14.4 VDC
4 Ch: 65 W x 4 (4 Ω)
4 Ch: 95 W x 4 (2 Ω)
3 Ch: 65 W x 2 (4 Ω) + 190 W x 1 (4 Ω)
3 Ch: 95 W x 2 (2 Ω) + 190 W x 1 (4 Ω)
2 Ch: 190 W x 2 (4 Ω)
Filters
Bypass
Hi-Pass
Lo-Pass
Band-Pass


Yes
A/B: 80 Hz @ 12 dB/Oct.
A/B: 50 ÷ 500 Hz @ 12 dB/Oct.
-

Distortion - THD
(100Hz @ 4Ω)
0.01%
S/N Ratio
(A weighted @ 1V)
103 dB
Damping factor
(100Hz @ 4Ω)
120
Size W x D x H
mm (in.)
315 x 190 x 50 (12.40 x 7.48 x 1.97)

HCP 4M four channels  marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier. Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensure extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies. The HCP 4 M fourchannel model features also an extended frequency range filter, which can be used when designing active 2-way speaker systems.

HMX65SLD Feature:

    • 6-1/2" marine speakers (pair)
    • polypropylene woofer
    • Santoprene rubber surround
    • 1" neodymium dome tweeter
    • built-in RGB LED lighting
    • designed for marine applications
    • stainless steel tweeter grille
    • aramid fiber spider with silicone-insulated lead wires
    • gold-plated corrosion resistant terminals
    • designed for infinite baffle applications
    • built-in crossovers
Specs:
  • handles up to 75 watts RMS (150 peak)
  • frequency response 50-25,000 Hz
  • sensitivity: 89 dB
  • impedance: 4 ohms
  • mounting depth: 2-3/4"

High-performance speakers with LED light

Hertz designed their HMX 6.5 S-LD 6-1/2” marine speakers to bring high-quality audio and high style to your boat. These rugged speakers will handle up to 75 watts RMS, so they'll be able to cut through the noise from your engine and the wind. With big magnets, polypropylene cones, and acoustic lens tweeters optimized for off-axis dispersion, you'll love the sounds you hear.  The cool, built-in RGB LED lights look great, too.

Built-in LED light

These Hertz speakers bring something extra to the party – multi-color LED lighting. The RGB LED lighting circuit sits just below the tweeter and it's protected by a transparent cover that also acts as a light diffuser. In order to control the multi-color RBG, you'll need an RGB controller (sold separately).

Ready for action

The speaker basket and grille are made from a rugged, UV-resistant polymer that stands up to water, dust, and mud, while the stainless steel mesh grille protects the tweeter from both dirt and damage. Aramid fiber spiders, silicone-insulated leads, and Santoprene rubber surrounds also help keep these durable speakers rockin' for years to come.

About Hertz

When you think of Italian cars, you think of style, performance, and awesome sound. Same goes for Italian audio gear. Hertz speakers, subs, and amps have made cars sound super since 1998. Known for great sound and technological innovation, high-end gear from Hertz will bring powerful performance audio to any vessel.

Power
4 Ch: 65 W x 4 (4 Ω) 4 Ch: 95 W x 4 (2 Ω) 3 Ch: 65 W x 2 (4 Ω) + 190 W x 1 (4 Ω) 3 Ch: 95 W x 2 (2 Ω) + 190 W x 1 (4 Ω) 2 Ch: 190 W x 2 (4 Ω)
Warranty
1 Year
Write Your Own Review
You're reviewing:Hertz HCP4M Marine 4ch Amplifier + HMX65SLD (2 pair)
Your Rating
To Top