In stock
SKU
HMD8DSP

Hertz HMD8 DSP 8 Channel Marine Amplifier with DSP

8 Channel Marine Amplifier with DSP - 8 x 85 W RMS at 4ohm
$1,599.99
Did you find this item priced lower somewhere else? YES

Hertz HMD8 DSP 8-CH Marine Amplifier With DSP

The HMD8 DSP, powered by Hertz Marine DSP technology, rich new highs of listening pleasure during navigation. DSP user friendly PC-Software interface make the setup process a breeze, exploiting every single pills of performance from the installed speaker system. The amazing power of 8 * 85 W or 4 * 260 W (RMS@ 4Ω) gives the HMD 8DSP the capability to drive with authority the complete speaker system generating tons of crystal clear SPL up to 3 different zone of the vessel. “Power for the Waves” design philosophy features a sturdy enclosure made of extruded aluminum with an anti-corrosion treated PCB to ensure years of listening pleasure in open water.

 

Specifications:

Data table

DIGITAL SIGNAL PROCESSOR

 

Filter type

Full / High pass / Low pass / Band pass

Filter model and slope

Butterworth (6, 12, 18, 24, 30, 36, 42, 48, 54, 60 dB/oct)

Linkwitz-Riley (12, 24, 36, 48, 60 dB/oct)

Bessel (6, 12, 18, 24, 30, 36, 42, 48, 54, 60 dB/oct)

Chebyshev (6, 12, 18, 24, 30, 36, 42, 48, 54, 60 dB/oct)

QLP quasi-linear phase (6, 12 dB/oct)

Crossover frequency

20 Hz – 20000 Hz integer values

Phase control

0 ° – 180°, all pass equalizer poles

Bass boost

Analog input equalizer

Output equalizer

Graphic and Parametric modes

n. 10 parametric poles (Peaking, High Shelf, Low Shelf, Notch, All pass) ±12 dB gain, variable Q (0.5 – 16.0)

n. 10 graphic poles

Time alignment distance

0 – 510 cm (0 – 200.8 inches)

Time alignment delay

0 – 15 ms

Time alignment step

1 cm

Time alignment fine set step

1 sample

Memories

n. 2 memories

n. 3 parametric poles for each memory (Peaking, High Shelf, Low Shelf) ±12 dB gain, variable Q (0.5 – 16.0)

Preset

Rotary switch for 7 installation presets

AMPLIFIER STAGE

Distortion – THD @ 1 kHz, 4Ω, 70% Rated Power

0,06%

Damping factor @ 1 kHz, 4Ω, 2 VRMS

> 110

Bandwidth @ -1.5 dB

10Hz ÷ 22kHz

S/N ratio (A weighted @ 1 V Input) Master Input

100 dBA

S/N ratio (A weighted @ 1 V Input) Optical Input

105 dBA

Input sensitivity Pre-In

0.6 ÷ 6 VRMS

Input sensitivity Speaker-In

2.2 ÷ 22 VRMS

Minimum load impedance

8Ch: 2Ω

4Ch – (Bridge 1/2; 3/4; 5/6; 7/8) : 4Ω

OUTPUT POWER (RMS) @14.4 VDC, 1% THD:

8Ch @ 4Ω

85 W x 8

8Ch @ 2Ω

130 W x 8

4Ch (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ω

More Information
Price
$1,599.99
Condition
New
Manufacturer
Hertz
Description

Hertz HMD8 DSP 8-CH Marine Amplifier With DSP

The HMD8 DSP, powered by Hertz Marine DSP technology, rich new highs of listening pleasure during navigation. DSP user friendly PC-Software interface make the setup process a breeze, exploiting every single pills of performance from the installed speaker system. The amazing power of 8 * 85 W or 4 * 260 W (RMS@ 4Ω) gives the HMD 8DSP the capability to drive with authority the complete speaker system generating tons of crystal clear SPL up to 3 different zone of the vessel. “Power for the Waves” design philosophy features a sturdy enclosure made of extruded aluminum with an anti-corrosion treated PCB to ensure years of listening pleasure in open water.

 

Specifications:

Data table

DIGITAL SIGNAL PROCESSOR

 

Filter type

Full / High pass / Low pass / Band pass

Filter model and slope

Butterworth (6, 12, 18, 24, 30, 36, 42, 48, 54, 60 dB/oct)

Linkwitz-Riley (12, 24, 36, 48, 60 dB/oct)

Bessel (6, 12, 18, 24, 30, 36, 42, 48, 54, 60 dB/oct)

Chebyshev (6, 12, 18, 24, 30, 36, 42, 48, 54, 60 dB/oct)

QLP quasi-linear phase (6, 12 dB/oct)

Crossover frequency

20 Hz – 20000 Hz integer values

Phase control

0 ° – 180°, all pass equalizer poles

Bass boost

Analog input equalizer

Output equalizer

Graphic and Parametric modes

n. 10 parametric poles (Peaking, High Shelf, Low Shelf, Notch, All pass) ±12 dB gain, variable Q (0.5 – 16.0)

n. 10 graphic poles

Time alignment distance

0 – 510 cm (0 – 200.8 inches)

Time alignment delay

0 – 15 ms

Time alignment step

1 cm

Time alignment fine set step

1 sample

Memories

n. 2 memories

n. 3 parametric poles for each memory (Peaking, High Shelf, Low Shelf) ±12 dB gain, variable Q (0.5 – 16.0)

Preset

Rotary switch for 7 installation presets

AMPLIFIER STAGE

Distortion – THD @ 1 kHz, 4Ω, 70% Rated Power

0,06%

Damping factor @ 1 kHz, 4Ω, 2 VRMS

> 110

Bandwidth @ -1.5 dB

10Hz ÷ 22kHz

S/N ratio (A weighted @ 1 V Input) Master Input

100 dBA

S/N ratio (A weighted @ 1 V Input) Optical Input

105 dBA

Input sensitivity Pre-In

0.6 ÷ 6 VRMS

Input sensitivity Speaker-In

2.2 ÷ 22 VRMS

Minimum load impedance

8Ch: 2Ω

4Ch – (Bridge 1/2; 3/4; 5/6; 7/8) : 4Ω

OUTPUT POWER (RMS) @14.4 VDC, 1% THD:

8Ch @ 4Ω

85 W x 8

8Ch @ 2Ω

130 W x 8

4Ch (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ω

Power
85 W x 8
Warranty
1 Year
Minimum Advertised Price
$1,650.00
Write Your Own Review
You're reviewing:Hertz HMD8 DSP 8 Channel Marine Amplifier with DSP
Your Rating
To Top