Hydroblast LVHB55 Heated Washer Fluid Installed

HydroBlast

The Hydro Blast unit is designed to enhance the driver’s all-season safety and

convenience by increasing overall performance of a vehicle washer system. The

unit works with virtually all existing washer/wiper systems.

The Hydro Blast is connected, in-line, with the windshield washer hose at a point between the washer pump and

washer nozzles. Once the unit is activated the washer fluid inside its heating chamber will be heated and kept

within pre-determined temperature limit of 140 °F (60C). So there is always hot fluid inside the unit’s heating

chamber which can be used by a driver for cleaning the windshield.

Each time the driver activates the factory installed washer system, heated washer fluid is applied to the windshield

for approximately the first 3-4 seconds of spray. The next portion of heated washer fluid is available in 10-20

seconds (depending on ambient conditions).

During winter months, heated washer fluid helps to remove frost and ice from the windshield, minimize ice

build-up on the wiper blades while driving, unblock partially frozen washer nozzles, and reduce wear and tear of

the wiper blades. During warmer months, heated washer fluid helps to eliminate summer glare by removing haze

and streaks, dissolve and remove mud, dirt, insects and sap.