iDatalink HRN-HRR-HO1 Vehicle-specific Harness owner's manual

• Vehicle harness
• Front preout harness
• Rear preout harness
• Sub harness
• "A" harness
• "B" harness
• OBD II harness
• NAV/Bluetooth harness

iDatalink working with Honda

iDatalink's HRN-HRR-HO1 wiring adapter works in conjunction with iDatalink's Maestro ADS-MRR or ADS-MRR2 module, allowing you to connect a new car stereo in select 2006-11 Honda-made vehicles. If you're buying a compatible iDatalink-ready car stereo, you'll enjoy the outstanding performance of your receiver, plus seamless touchscreen control over most of the factory features in select Honda-built vehicles, including the use of your steering wheel audio controls, Bluetooth®, auxiliary input, and factory amp. You'll also appreciate the additional features added by the adapter, including the ability to view performance gauges and other vehicle information on your radio's screen.

Works with just about any radio

Even if you're installing a radio that's not iDatalink-ready, you'll still retain the use of your steering wheel audio controls and your factory amp in these vehicles. The package includes connectors that plug in between the Maestro module and your factory radio's wiring plugs. You'll have to solder or splice together this harness's power/ground, illumination, speaker, and navigation output wires to the corresponding wires on your aftermarket receiver's wiring harness.

Plug directly into your new stereo

This harness also features an in-line head-unit connector harness which will plug into iDatalink's "Head-unit direct" harnesses designed for select radio brands, eliminating the need to splice any wires. If you're installing a radio that doesn't work with a "Head-unit direct" harness, simply cut off the plug and connect the wires to the harness included with your new radio.

Installation Note: The HRN-HRR-HO1 adapter must be used with the iDatalink Maestro ADS-MRR or ADS-MRR2 module to connect any new car stereo to your Honda-made vehicle.