The store will not work correctly in the case when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Rear: All-Pass, High-Pass, or Low-Pass @ 60/80/120Hz
Frequency Response: 20Hz to 20kHz
THD: <1%
Fuse Rating: 40A
Dimensions: 200mm x 85mm x 45mm
All wires terminated with Molex or Molex-style connectors
600X
component speaker system includes 2 woofers and 2 tweeters with inline crossovers
6-1/2" Plus One basalt fiber woofer cone with hi-roll rubber surround
1" edge-driven polyphenylene sulfide dome tweeter
removable tweeter works with component and coaxial configurations
IPX5 weather-resistance rating
Street Glide, Road Glide, and Tour Pak grilles included
handles up to 80 watts RMS (240 watts peak power)
frequency response: 60-20,000 Hz
sensitivity: 95 dB at 2.83 volts
grilles included
900XS
component speaker system includes 2 woofers and 2 tweeters with inline crossovers
6"x9" Plus One basalt fiber woofer cone with hi-roll rubber surround
edge-driven polyphenylene sulfide dome tweeter
removable tweeter works with component and coaxial configuration
handles up to 100 watts RMS (300 watts peak power)
frequency response: 50-20,000 Hz
sensitivity: 95 dB at 2.83 volts
grilles included
BCDSPXHD2
Flash the Factory Radio Integration technology allows the DSP to reflash the factory radio for a flat response curve, without the need for external equipment. This reduces the cost, saves time, and allows installers to provide better service with complete control over the upgrade.
Digital Signal Processor + Interface Enhance your sound system with a DSP that reflashes the OE radio and gives you full tuning control from the palm of your hand. Designed for easy integration with aftermarket or factory audio systems and easy expansion with amplifiers or other devices. Refer to the vehicle applications tab or chart for more information.
Important information The Saddle Tramp DSP is a device that allows a user to flash the Harley-Davidson® radio to a 4-channel, flat audio output curve; but when the device is connected, it locks itself to the vehicle’s identification number (VIN), saving the last known state of the radio into memory. In order to unlock the Saddle Tramp DSP and use it on a different vehicle, or return it, you must remove the flash from the motorcycle, returning the radio back to factory settings. This can only be done 3 times in total. In the event that this product needs to be returned to the manufacturer, it cannot be locked to a motorcycle’s VIN.
Built-in Integration and Easy Installation
Small footprint for easy installation behind the fairing
BC-9715 pre-wired harness included for ease of installation
Retains balance and fade control
Built-in clipping detection and limiting circuits
Bass knob included
Water-resistant case & connections
Micro-B USB updatable
Upgrade Your Music Experience and Customize Your Sound
10 channels of output from the DSP
31-band graphic EQ, or 5 band parametric EQ per channel
4 selectable crossover slopes (12, 24, 36, or 48db per octave)
Built-in selectable crossover per channel (high, low & band) to achieve the perfect sound
Independent equalization for front, rear, and subwoofer
Time delay circuit per channel (front and rear channels can be delayed independently up to 10ms)
All programming is done using the AXXESSDSP XL app on Android devices ONLY
Read, write, and store configurations for future recall
Optional password protection feature for tuning control via the mobile app
Harley-Davidson®
Works with 4- Button
Works with 8- Button
Works with Touchscreen
BC-9720 Backbone Rear Speaker Extension Harness
4-pin backbone harness for adding rear speakers
Matches Harley Davidson® wiring configuration
18GA OFC wires with OE connectors
Works with BC-9721 splitter
Used when adding the BC-9716 harness
Harley-Davidson®
Hard Saddlebag 1998-Up*
*1998-2013 applications require the BC-9716 to use this harness
*Some models without factory installed rear audio may require a radio flash to activate the rear audio output.
BC-9723 Saddle Bag Speaker Harness
Saddlebag speaker wiring harness
Matches Harley Davidson® wiring configuration
Plugs into OE backbone harness or BC-9720
Used when adding the BC-9716 harness
Quick disconnect harnesses when removing saddlebags
Water-tight grommet included
For use with all Saddle Tramp bag lids
Sold as pair
Harley Davidson®
Hard Saddlebag 1998-Up*
*1998-2013 applications require the BC-9716 to use this harness
*Some models without factory installed rear audio may require a radio flash to activate the rear audio output.
BCAMP04
Fits all Harley Davidson Road Glide® 2015 – Up
No drilling required
Steel construction with UV powder coating
Pre-drilled for Metra PowerSports Amps (MPS-AMP60x4, MPS-AMP100x2 or MPS-AMP200-2D)
Works with most other micro amps
Note: Requires four 1/4-20 Bolts .75" long (not supplied) to attach
Harley Davidson
Road Glide® FLT 2015-Up
BCAMP06
Saddle Tramp® has a new amp mounting plate for Harley-Davidson® Street Glide motorcycles; the BC-AMP06. This product is installed on top of the OE radio tray and reuses the factory bolts. The kit includes a hook and loop pad and cable ties. The mounting plate is black powder-coated steel with slots around the outside edge which can be used to secure the wiring for the amplifier with the supplied cable ties. Original fairings on these motorcycle models offer adequate space for aftermarket amps.
Durable steel construction
Black powder coat
Uses OE bolts for mounting
OE harness mounting points
Multiple zip tie location to secure wire to bracket
