Out of stock
SKU
S21224SSZ

JBL S2-1224SS (Factory Refurbished)

Ported enclosure with one 12" S2-1224 subwoofer
$119.99
Did you find this item priced lower somewhere else? YES

JBL S2-1224SS

Ported enclosure with one 12" S2-1224 subwoofer

  • ported enclosure with one 12" subwoofer
  • polypropylene cone and nitrile rubber surround
  • Slipstream port
  • switchable 2-ohm or 4-ohm impedance
  • power handling: 275 watts RMS (1100 watts peak)
  • frequency response: 25 Hz-175 Hz
  • sensitivity: 93 dB
  • dimensions: 23-3/4"W x 16-3/8"H x 13"D
General
Woofer Size (inches) 12
Woofer Material Polypropylene
Enclosure Type Ported
Color Black
Pieces in System 1
Width (inches) 23-3/4
Height (inches) 16-3/8
Depth (inches) 13-1/2
Second Depth (inches) 10-3/8
Connector Type Binding post
Frequency Response 25-175 Hz
Power Range (Watts RMS) 275
Maximum Wattage 1100
Sensitivity 93 dB
Impedance 4 ohms

Features

Selectable Smart Impedance (SSI): A switch on the input terminal allows you to easily change the woofer's impedance between 2Ω and 4Ω settings. (The connected amplifier should be off when changing the impedance.)

Slipstream Port: The JBL S2-1224SS has a Slipstream port on the front of the enclosure. The double-flared shape of the oversized port is precisely calculated to efficiently eliminate port noise. Even at high SPL, airflow through the port will remain uniform, offering better low-frequency extension and woofer protection. Because the area of the port in the middle is smaller than the mouth of the port, the port can be much shorter than a cylindrical port with a surface area the same as the Slipstream port's mouth; this means it can fit into smaller boxes.

Binding Post: The wire terminal, on the right side of the enclosure, features a pair of binding posts that will accept single banana plugs, pin connectors, spade lugs, and bare wire up to 10-gauge.

More Information
Price
$119.99
Condition
Refurbished
Manufacturer
JBL
Description

JBL S2-1224SS

Ported enclosure with one 12" S2-1224 subwoofer

  • ported enclosure with one 12" subwoofer
  • polypropylene cone and nitrile rubber surround
  • Slipstream port
  • switchable 2-ohm or 4-ohm impedance
  • power handling: 275 watts RMS (1100 watts peak)
  • frequency response: 25 Hz-175 Hz
  • sensitivity: 93 dB
  • dimensions: 23-3/4"W x 16-3/8"H x 13"D
General
Woofer Size (inches) 12
Woofer Material Polypropylene
Enclosure Type Ported
Color Black
Pieces in System 1
Width (inches) 23-3/4
Height (inches) 16-3/8
Depth (inches) 13-1/2
Second Depth (inches) 10-3/8
Connector Type Binding post
Frequency Response 25-175 Hz
Power Range (Watts RMS) 275
Maximum Wattage 1100
Sensitivity 93 dB
Impedance 4 ohms

Features

Selectable Smart Impedance (SSI): A switch on the input terminal allows you to easily change the woofer's impedance between 2Ω and 4Ω settings. (The connected amplifier should be off when changing the impedance.)

Slipstream Port: The JBL S2-1224SS has a Slipstream port on the front of the enclosure. The double-flared shape of the oversized port is precisely calculated to efficiently eliminate port noise. Even at high SPL, airflow through the port will remain uniform, offering better low-frequency extension and woofer protection. Because the area of the port in the middle is smaller than the mouth of the port, the port can be much shorter than a cylindrical port with a surface area the same as the Slipstream port's mouth; this means it can fit into smaller boxes.

Binding Post: The wire terminal, on the right side of the enclosure, features a pair of binding posts that will accept single banana plugs, pin connectors, spade lugs, and bare wire up to 10-gauge.

Size
12 in.
Warranty
90 Days
Write Your Own Review
You're reviewing:JBL S2-1224SS (Factory Refurbished)
Your Rating
To Top