JL Audio Bass Combo Package: JD250/1 Amplifier with 10W0V3-4 10" Subwoofer

JL Audio JD250/1  JD Series 4-channel car amplifier — 75 watts RMS x 4

Monoblock Class D Subwoofer Amplifier, 250 W x 1 @ 2 Ω / 150 W x 1 @ 4 Ω - 14.4V

Designed to produce a healthy 250 watts into 2 ohms (14.4V, 1% THD), the JD250/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. Our proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion.

The JD250/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier. 

The JD250/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you easily set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat.

Rated Continuous (RMS) Power @ 14.4 V

• @ 4 Ω 150 W RMS x 1
• @ 3 Ω 200 W RMS x 1
• @ 2 Ω 250 W RMS x 1
• @ 1.5 Ω N/A

Rated Continuous (RMS) Power @ 12.5 V

• @ 4 Ω 115 W RMS x 1
• @ 3 Ω 150 W RMS x 1
• @ 2 Ω 200 W RMS x 1
• @ 1.5 Ω N/A

General Specifications

• Frequency Response 7 Hz - 500 Hz (+0, -1dB)
• S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W >60 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping Factor @ 4 Ω >1000 / 50 Hz
• Damping Factor @ 2 Ω >500 / 50 Hz
• THD+N @ Rated Power <1% @ 2 Ω per Ch.
• Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
• Min.Copper Power / Ground Wire Gauge 8 AWG wire
• Fuse Rating 30 A (AFS, AGU or MaxiFuse™)

Signal Processing

• Filter Mode(s) Low-Pass only
• Filter Slope(s) 12 dB/octave
• Filter Frequency Range 50 Hz - 500 Hz
• Detented, Calibrated Filter Freq. Potentiometer No
• Filter Defeat Function No
• Infrasonic Filter No
• Bass Boost EQ Yes
• Output Polarity Switch No
• Remote Subwoofer Level Control Optional (RBC-1)
• Remote Bass EQ Boost Control No
• Pass-Through Preamp Output Buffered

JL Audio 10W0v3-4 W0v3 Series 10" 4-ohm subwoofer

Product highlights:

• 10" 4-ohm subwoofer
• polypropylene cone with foam surround
• power range: 75-300 watts RMS
• peak power handling: 600 watts
• frequency response: 25-250 Hz
• sensitivity: 84.07 dB
• top-mount depth: 4-15/16"
• sealed box volume: 0.65 cubic feet
• ported box volume: 1.125 cubic feet
• grille not included