We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
End of December 2026
SKU
R1V2653
Rockford Fosgate R1V2-653
Prime 6.5" 4-Ohm 3-Way Coaxial Speaker
$89.99
Did you find this item priced lower somewhere else?
YES
Rockford Fosgate R1V2-653
Prime 6.5" 4-Ohm 3-Way Coaxial Speaker
The 6.5-inch 3-way coaxial adds a larger 1-inch tweeter and 15 mm piezo driver for extended high frequency coverage. With its sensitivity, wide frequency response, and mounting depth, it balances output, bandwidth, and installation flexibility into one multi-purpose speaker.
Features:
- 50-Watt RMS power handling simplifies amplifier matching across Prime lineup
- 1/2” (15 mm) piezo tweeter on 3-way models extends high-frequency reproduction
- 1” (25 mm) Ferrofluid-cooled PET balanced-dome tweeter for detailed high frequencies
- Tweeter ICC (Internal Concealed Crossover) simplifies installation
- 6dB/octave 100-volt capacitor tweeter network preserves phase integrity and reliability
- Half-roll Nitrile Butyl rubber surround maintains flexibility and mechanical integrity
- 30% Mica-filled polypropylene cone for clean, controlled midrange and mid-bass performance
- 4Ω impedance provides compatibility with factory and aftermarket systems
- 1” (25 mm) copper voice coil improves heat dissipation, power handling, and reliability
- Kapton® voice coil former delivers high strength and thermal stability
- Overhung motor design maintains linear control through speaker's normal excursion
- Poly-cotton spider delivers accurate cone motion, stability, and reduced distortion
- Stamped-steel basket provides a rigid, durable foundation with OEM-friendly fitment
- High-grade Y30 ferrite motor increases magnetic energy and conversion efficiency
- FEMM-based T-yoke optimization concentrates flux in the voice-coil gap for controlled output
- Nickel-plated copper terminals provide durable, corrosion-resistant connections
- Low-profile open-frame design improves venting and supports shallow installs
- Sold in pairs (2 each)
Specifications:
- Speaker Type: 3-Way Coaxial
- Midrange Size (Nominal Diameter): 6.5"
- Tweeter Size (Nominal Diameter): 3/4” (19 mm)
- Nominal Impedance (Ohms): 4Ω
- Frequency Response (Hz): 60Hz - 20kHz
- Voice Coil Diameter (in/mm): 1" (25mm)
- Crossover: Tweeter High-Pass: 8.4 kHz (4.7 µF) / Midrange Bass Blocker: —
- Power Handling (Watts RMS): 50 Watts RMS / 100 Watts Peak
- Fs (Hz): 80 Hz
- Sensitivity (dB @ 1W/1M): 87 dB
- Sensitivity (2.83V/1M): 90 dB
- Removable Motor Cover: Yes
- Mounting Hardware: Yes
- Grille/Trim Ring Included: No
- Cutout Diameter: 5.42" (137.6 mm)
- Mounting Depth: 1.81" (46.0 mm)
- Front Side Clearance: 0.26" (6.5 mm)
In the Box:
- (2) 6.5" 4Ω Coaxial Speakers
- (2) Cutout Templates
- Installation Hardware
More Information
Price
$89.99
Condition
New
Manufacturer
Rockford Fosgate
Description
Rockford Fosgate R1V2-653
Prime 6.5" 4-Ohm 3-Way Coaxial Speaker
The 6.5-inch 3-way coaxial adds a larger 1-inch tweeter and 15 mm piezo driver for extended high frequency coverage. With its sensitivity, wide frequency response, and mounting depth, it balances output, bandwidth, and installation flexibility into one multi-purpose speaker.
Features:
- 50-Watt RMS power handling simplifies amplifier matching across Prime lineup
- 1/2” (15 mm) piezo tweeter on 3-way models extends high-frequency reproduction
- 1” (25 mm) Ferrofluid-cooled PET balanced-dome tweeter for detailed high frequencies
- Tweeter ICC (Internal Concealed Crossover) simplifies installation
- 6dB/octave 100-volt capacitor tweeter network preserves phase integrity and reliability
- Half-roll Nitrile Butyl rubber surround maintains flexibility and mechanical integrity
- 30% Mica-filled polypropylene cone for clean, controlled midrange and mid-bass performance
- 4Ω impedance provides compatibility with factory and aftermarket systems
- 1” (25 mm) copper voice coil improves heat dissipation, power handling, and reliability
- Kapton® voice coil former delivers high strength and thermal stability
- Overhung motor design maintains linear control through speaker's normal excursion
- Poly-cotton spider delivers accurate cone motion, stability, and reduced distortion
- Stamped-steel basket provides a rigid, durable foundation with OEM-friendly fitment
- High-grade Y30 ferrite motor increases magnetic energy and conversion efficiency
- FEMM-based T-yoke optimization concentrates flux in the voice-coil gap for controlled output
- Nickel-plated copper terminals provide durable, corrosion-resistant connections
- Low-profile open-frame design improves venting and supports shallow installs
- Sold in pairs (2 each)
Specifications:
- Speaker Type: 3-Way Coaxial
- Midrange Size (Nominal Diameter): 6.5"
- Tweeter Size (Nominal Diameter): 3/4” (19 mm)
- Nominal Impedance (Ohms): 4Ω
- Frequency Response (Hz): 60Hz - 20kHz
- Voice Coil Diameter (in/mm): 1" (25mm)
- Crossover: Tweeter High-Pass: 8.4 kHz (4.7 µF) / Midrange Bass Blocker: —
- Power Handling (Watts RMS): 50 Watts RMS / 100 Watts Peak
- Fs (Hz): 80 Hz
- Sensitivity (dB @ 1W/1M): 87 dB
- Sensitivity (2.83V/1M): 90 dB
- Removable Motor Cover: Yes
- Mounting Hardware: Yes
- Grille/Trim Ring Included: No
- Cutout Diameter: 5.42" (137.6 mm)
- Mounting Depth: 1.81" (46.0 mm)
- Front Side Clearance: 0.26" (6.5 mm)
In the Box:
- (2) 6.5" 4Ω Coaxial Speakers
- (2) Cutout Templates
- Installation Hardware
Size
6 1/2 in.
Power
50 watts
Impedance
4 Ω
Warranty
2 Years