Rockford Fosgate R2V2-69
Prime 6x9” 4-Ohm 2-Way Component System

The 6x9-inch component system combines the lineup’s largest midbass cone with separate-tweeter placement. Its low-frequency extension and sensitivity deliver fuller bass and strong output, while flexible tweeter mounting improves imaging and detail across the cabin.

Features:

• 50-Watt RMS power handling simplifies amplifier matching across Prime lineup
• 1” (25 mm) Ferrofluid-cooled PET balanced-dome tweeter for detailed high frequencies
• Separate tweeter placement lets installers optimize soundstage, imaging, and clarity
• Flush, flat, and angled surface-mount cups support flexible tweeter installation
• Tweeter swivels up to 16.5 degrees of adjustment to precisely direct high frequencies
• Front-loading flush cup uses standard 1.5” hole-saw for panels 1/8" to 1/2"
• Tweeter plugs directly into pre-terminated spade connectors in woofer basket
• Tweeter ICC (Internal Concealed Crossover) simplifies installation
• 6dB/octave 100-volt capacitor tweeter network preserves phase integrity and reliability
• 30% Mica-filled polypropylene cone for clean, controlled midrange and mid-bass performance
• Half-roll Nitrile Butyl rubber surround maintains flexibility and mechanical integrity
• 4Ω impedance provides compatibility with factory and aftermarket systems
• 1” (25 mm) copper voice coil improves heat dissipation, power handling, and reliability
• Kapton® voice coil former delivers high strength and thermal stability
• Overhung motor design maintains linear control through speaker's normal excursion
• Poly-cotton spider delivers accurate cone motion, stability, and reduced distortion
• Stamped-steel basket provides a rigid, durable foundation with OEM-friendly fitment
• High-grade Y30 ferrite motor increases magnetic energy and conversion efficiency
• FEMM-based T-yoke optimization concentrates flux in the voice-coil gap for controlled output
• Nickel-plated copper terminals provide durable, corrosion-resistant connections
• Low-profile open-frame design improves venting and supports shallow installs
• Sold in pairs (2 each)

Specifications:

• Speaker Type: 2-Way Component
• Midrange Size (Nominal Diameter): 6x9"
• Tweeter Size (Nominal Diameter): 1" (25 mm)
• Nominal Impedance (Ohms): 4Ω
• Frequency Response (Hz): 56Hz - 20kHz
• Voice Coil Diameter (in/mm): 1" (25mm)
• Crossover: Tweeter High-Pass: 12 kHz (3.3 µF) / Midrange Bass Blocker: —
• Power Handling (Watts RMS): 50 Watts RMS / 100 Watts Peak
• Fs (Hz): 75 Hz
• Sensitivity (dB @ 1W/1M): 88 dB
• Sensitivity (2.83V/1M): 91 dB
• Removable Motor Cover: Yes
• Mounting Hardware: Yes
• Grille/Trim Ring Included: No
• Cutout Diameter: 8.41" x 5.71" (213.5 x 145 mm)
• Mounting Depth: 2.60" (66.0 mm)
• Front Side Clearance: 0.37" (9.4 mm)

In the Box:

• (2) 6x9" 4Ω Component System
• (2) Cutout Templates
• Installation Hardware