We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Hertz HCP2MX 2ch Marine Stereo Amplifier + HTX8MCLWX2 (2)
Hertz HCP2MX 2ch Marine Stereo Amplifier + (2 pair) Marine HTX8MCLWX2 Tower Coax Clamp lighting (White) Package
HCP2MX Features:
| Channel mode | 2 - 1 |
| Output Power (RMS) @ 14.4 VDC |
2 Ch: 120 W x 2 (4Ω) 2 Ch: 200 W x 2 (2Ω) 1 Ch: 400 W x 1 (4Ω) |
| Filters Bypass Hi-Pass Lo-Pass Band-Pass Subsonic |
- 50 ÷ 3200 Hz @ 12 dB/Oct. 50 ÷ 3200 Hz @ 12 dB/Oct. - - |
| Distortion - THD (100Hz @ 4Ω) |
0,03 % |
| S/N Ratio (A weighted @ 1V) |
105 dB |
| Damping factor (100Hz @ 4Ω) |
300 |
| Size W x D x H mm (in.) |
315 x 190 x 50 (12.40 x 7.48 x 1.97) |
HCP 2 MX marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier. Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensure extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies. More specifically HCP 2 MX features Hi-Pass pre-amplified outputs, providing the ability to create a Band-Pass on the front woofer.
HTX8MCLWX2 Feature:
| Power Handling - Peak W | 200 |
| Power Handling - Continuous W | 100 |
| Impedance Ω | 4 |
| Frequency response Hz | 45 ÷ 25k |
| Sensitivity dB SPL | 91 |
| Woofer size mm (in.) | 200 (8) |
| Tweeter size mm (in.) | 36 (1.4) |
| Woofer Voice Coil Ø mm (in.) | 32 (1.26) |
| Tweeter voice coil Ø mm (in.) | 20 (0.8) |
| Woofer magnet | High density flux ferrite |
| Tweeter magnet | Neodymium |
| Woofer cone | Polypropylene with UV inhibitors |
| Tweeter dome | PEI |
Are you ready to enjoy your favorite track at high output level during your daily water ski session? Hertz Marine Towers will make your sport and leisure outings unforgettable, thanks to impressive audio performance and cool color lighting.
The solid 316-Stainless steel clamp mounting is ideal for Round or Square profile pipe applications where sound needs to be easily oriented and quickly released.
This is possible thanks to Q-OS² (Quick Orientation & Release for Sound & Safety) patent pending technology.
“Adjustable logo” allows for several tower positioning without affecting the correct Hertz logo orientation. Front and rear logo can be oriented within 64 steps.
Hertz HCP2MX 2ch Marine Stereo Amplifier + (2 pair) Marine HTX8MCLWX2 Tower Coax Clamp lighting (White) Package
HCP2MX Features:
| Channel mode | 2 - 1 |
| Output Power (RMS) @ 14.4 VDC |
2 Ch: 120 W x 2 (4Ω) 2 Ch: 200 W x 2 (2Ω) 1 Ch: 400 W x 1 (4Ω) |
| Filters Bypass Hi-Pass Lo-Pass Band-Pass Subsonic |
- 50 ÷ 3200 Hz @ 12 dB/Oct. 50 ÷ 3200 Hz @ 12 dB/Oct. - - |
| Distortion - THD (100Hz @ 4Ω) |
0,03 % |
| S/N Ratio (A weighted @ 1V) |
105 dB |
| Damping factor (100Hz @ 4Ω) |
300 |
| Size W x D x H mm (in.) |
315 x 190 x 50 (12.40 x 7.48 x 1.97) |
HCP 2 MX marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier. Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensure extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies. More specifically HCP 2 MX features Hi-Pass pre-amplified outputs, providing the ability to create a Band-Pass on the front woofer.
HTX8MCLWX2 Feature:
| Power Handling - Peak W | 200 |
| Power Handling - Continuous W | 100 |
| Impedance Ω | 4 |
| Frequency response Hz | 45 ÷ 25k |
| Sensitivity dB SPL | 91 |
| Woofer size mm (in.) | 200 (8) |
| Tweeter size mm (in.) | 36 (1.4) |
| Woofer Voice Coil Ø mm (in.) | 32 (1.26) |
| Tweeter voice coil Ø mm (in.) | 20 (0.8) |
| Woofer magnet | High density flux ferrite |
| Tweeter magnet | Neodymium |
| Woofer cone | Polypropylene with UV inhibitors |
| Tweeter dome | PEI |
Are you ready to enjoy your favorite track at high output level during your daily water ski session? Hertz Marine Towers will make your sport and leisure outings unforgettable, thanks to impressive audio performance and cool color lighting.
The solid 316-Stainless steel clamp mounting is ideal for Round or Square profile pipe applications where sound needs to be easily oriented and quickly released.
This is possible thanks to Q-OS² (Quick Orientation & Release for Sound & Safety) patent pending technology.
“Adjustable logo” allows for several tower positioning without affecting the correct Hertz logo orientation. Front and rear logo can be oriented within 64 steps.