Features

Selectable Smart Impedance (SSI): A switch on the input terminal allows you to easily change the woofer's impedance between 2Ω and 4Ω settings. (The connected amplifier should be off when changing the impedance.)

Slipstream Port: The JBL S2-1024SS has a Slipstream port on the front of the enclosure. The double-flared shape of the oversized port is precisely calculated to efficiently eliminate port noise. Even at high SPL, airflow through the port will remain uniform, offering better low-frequency extension and woofer protection. Because the area of the port in the middle is smaller than the mouth of the port, the port can be much shorter than a cylindrical port with a surface area the same as the Slipstream port's mouth; this means it can fit into smaller boxes.

Binding Post: The wire terminal, on the right side of the enclosure, features a pair of binding posts that will accept single banana plugs, pin connectors, spade lugs, and bare wire up to 10-gauge.

JBL Stage A3001 Mono subwoofer amplifier

Product highlights:

• mono subwoofer amplifier
  • 300 watts RMS x 1 at 2 ohms (4-ohm rating unavailable)
• variable low-pass filter (32-320 Hz, 12 dB/octave)
• variable bass boost (0-12 dB at 40-100 Hz)
• variable phase adjustment (0-180°)
• preamp and speaker-level inputs
• wiring and hardware not included with amplifier
  • 8-gauge power and ground leads recommended
• fuse rating: 15A x 2
• dimensions: 9-9/16"W x 2"H x 5-3/4"D

Planet Audio 8GPK

8 Gauge Complete Amplifier Install Kit 8 AWG Cable Wire 8G

General Features:

• 20 ft. 8 GA Red Power Cable

• Competition High Quality Fuse Holder

• 3 ft. 8 GA Black Ground Cable

• 16 ft. 18 GA Blue Turn-On Wire

• 20 ft. High-Quality RCA (TRCA) Interconnect

• 30 ft. Speaker Wire

• 6 ft. Split Loom Tubing