Rockford Fosgate HD14SG-STAGE3 Four speakers & amplifier kit for select 2014+ Street Glide motorcycles

HD14SG-STAGE3 Audio kit for select 2014 and newer Street Glide.

INCLUDES:

• TMS65 (front fairing speakers)
• M5-800X4 (amplifier)
• RFK-HD14 (installation kit)
• TMS69BL14 (bag lid kit)

M5 Series Marine 4-Channel Amplifier M5-800X4

• marine 4-channel amplifier
  • 100 watts RMS CTA-2006 x 4 at 2 or 4 ohms
  • bridged power: 200 watts RMS CTA-2006 x 2 at 4 ohms
  • max Dynamic Power rating: 200 watts x 4 at 2 ohms
• Class AD amplifier design
• frequency response: 10-50,000 Hz
• variable low-pass and high-pass filters (50-250 Hz, 12 dB/octave)
• variable bass boost (0-18 dB at 45 Hz)
• marine features:
  • Element Ready™ chassis and conformal-coated PC boards
  • IPX6 water intrusion rating
  • heavy-duty molded connectors protect wiring from water and dirt
  • Preset button for instant tuning in Rockford Fosgate UTV audio packages

More Info:

• C.L.E.A.N. gain setup system includes clip lights
• auto remote turn-on
• preamp and speaker-level inputs
• preamp outputs
• wiring, fuse, and hardware not included with amplifier
  • 8-gauge power and ground leads and a 100-amp fuse recommended
• dimensions: 12"W (includes wiring) x 1-13/16"H x 4-1/4"D

Power Harley Davidson 6-1/2" full-range speakers for select 2014-up TMS65

Rockford Fosgate designed their TMS65 6-1/2" speakers specifically for 2014-up Harley-Davidson® Street Glide® motorcycles. These rugged, weather-resistant coaxial speakers fit right into the factory fairing and Tour Pak locations, and pack a lot of sonic punch in their compact frames.

A compact neodymium motor structure drives a reinforced polypropylene cone that brings out the best in the midrange and low frequencies. The 1" dome tweeter ensures clear, crisp highs, even when you're cruising at highway speeds. Rockford's VAST (Vertical Attach Surround Technique) surrounds give the speakers 25% more cone area without compromising ease of installation. The result? You'll get more performance from a smaller speaker, which is pretty much ideal for a motorcycle.

The durable, weather-resistant Santoprene surround protects the woofer from wind and weather, while the glass-reinforced polymer frame can stand up to rough roads or sizzling sunlight. Install these speakers using your Harley's factory hardware and the included Rockford Fosgate grille assemblies.

• 6-1/2" full-range motorcycle speakers
• designed for 2014-up Harley-Davidson Street Glide motorcycles
• fit directly into front fairing and rear Tour-Pak locations
• Element-Ready design is weather and water resistant
• carbon-fiber reinforced polypropylene cone
• glass-reinforced polymer frame
• 1" film dome tweeter with integrated phase plug and ASA grill
• 1-3/8" voice-coil
• Santoprene VAST surround
• Santoprene front isolation spider
• neodymium ring magnet motor
• integrated spade terminals
• integrated 6 dB crossover with polyester capacitor
• power handling: 75 watts RMS (150 watts peak)
• frequency response: 56-20,000 Hz
• sensitivity: 91 dB
• grilles and mounting hardware included

Rockford Fosgate TMS69BL14 6"x9" full-range speaker kit for select 2014-up Harley-Davidson motorcycles

Product highlights:

Kit Info:

• compatible with 2014-up Harley-Davidson factory bag lids
• designed for use with existing HD14-TKIT audio systems
• direct connect wiring harness
• includes all installation hardware, grilles, and accessories

Speaker Info:

• 6"x9"" full-range motorcycle speakers
• designed for bag lid locations
• Element-Ready design is weather and water resistant
• carbon-fiber reinforced polypropylene cone
• glass-reinforced polymer frame
• 1" film dome tweeter with integrated phase plug and ASA grill
• integrated 6 dB crossover with polyester capacitor
• Element-Ready design is weather and water resistant
• Santoprene VAST surround (creates more cone space for bigger sound)
• handles up to 100 watts RMS (200 watts peak)
• frequency response: 56-20,000 Hz
• sensitivity: 89 dB
• impedance: 4 ohms

Rockford Fosgate RFK-HD14 amp install kit for select 2014+ Harley Davidson motorcycles

The RFK-HD14 contains a mounting plate, heatsink, and wiring kit for installing compact Punch and Power series amplifiers on Harley-Davidson model years 1998 to current. The RFK-HD14 contains a mounting plate, heatsink, and wiring kit for installing compact Punch and Power series amplifiers. The cables have been upgraded to provide the necessary current and voltage requirements for the amplifier, and the heat-sink provides extended thermal time under demanding situations. Fits Harley-Davidson Street Glide model years 1998 to current. 

• Includes T Harness Connector (Front/Rear Fadeable (using RF Flash) and Built in DSR1 Loop (DSR1 Processor sold separately)