Rockford Fosgate RFK-HD14

Install Rockford Fosgate compact Power and Punch amplifiers in select 2014-up Harley-Davidson® motorcycles

Product Highlights:

• install a Rockford Fosgate compact-chassis amplifier in select 2014-up Harley-Davidsons
• everything you need to install your new Power or Punch amplifier
  • mounting brackets for Shark Nose and Bat Wing fairings
  • 8-gauge power and ground wire
  • T-harness for easier connection
  • Y-adapters for lower front and Tour-Pak speakers
  • Boom Audio bypass plugs
• amp sold separately

RFK-HD14 Wiring Kit: The Rockford Fosgate RFK-HD14 amplifier wiring kit is specifically designed to install select Rockford Fosgate Power and Punch Series powersports amplifiers, including the Power Marine TM400Xad 4-channel amplifier, on select 2014-up Harley Davidson motorcycles. The kit includes pre-cut, pre-loomed 100% Pure Crystal-Oxygen Free Copper (PC-OFC) wiring for installing a sound system, meeting or exceeding American Wire Gauge (AWG) requirements. It includes 8-gauge power and ground wires for running to the battery, as well as all input and output harnesses for running signal from the headunit to the amp and then on to each individual speaker. Additional wiring includes Y-adapters for adding lowers or Tour-Pak speakers, Boom! Audio bypass plugs for factory amplified systems and a DSR1 loop-thru harness for adding an optional Rockford Fosgate DSR-1 processor (sold separately). The battery power wire includes an inline fuse holder with installed 60A Maxi fuse. The amplifier wiring kit also includes an additional amplifier heatsink, for better heat dissipation at higher volumes, and an amplifier mounting bracket. The amplifier heat sink includes pre-drilled and tapped screw holes for the TM400Xad, PM100X1, select Punch, and select Power 2-channel and 4-channel compact amplifiers.

Note: To retain proper fidelity and avoid speaker damage, your factory radio will need to be flashed by an authorized Harley-Davidson dealer after installing the Rockford Fosgate sound system.

Compatibility: The RFK-HD14 amplifier wiring kit is compatible with the following model Harley-Davidson motorcycles:

Punch & Power Screw Hole Dimensions (center-hole to center-hole):

• Punch: 2.47" (W) x 6.24" (L)
• Power:
  • 2-Channel: 0.92" (W) x 6.56" (L)
  • 4-Channel: 0.92" (W) x 7.87" (L)